Suitable stepper motor drivers for my creation

[chillybo]

Please view my attempt at building a roughly 4 foot by 2 foot CNC router for wood plastic and aluminium cutting. I'm already committed to using 2 x low inductance nema 34's (3.4 mH, 4.6Nm, 5.88 amps parallel)) for x and y (belt for X direct drive for Y) and a Nema 23 (3mH, 4Nm 4 amps parallel) for the Z axis. I have built a 52 volt unregulated power supply to power the three stepper motors (750VA, 36 x 2 output in parallel)
My controller is a CS-Labs IP-M.
I am now keen to order more components to get it moving in particular stepper motor drivers. I understand from reading numerous threads on here that digital drivers are the way to go and I will need 20 to 80 volt capable ones rather than 50 volt max as my power supply exceeds 50 volts.
My question is ....any recommendations for stepper motor drivers and are these suitable?
https://www.aliexpress.com/item/2041...f-02c2ccf6a7ad

Constructive criticism about my creation is welcome
Thanks in advance ...Chris