eMachineShop Upgrade

[jonhst]

Hi Bladevane, please send me the old eMachineShop 1.932, 1.935 My email is: tsps at mail.com
Thanks,
John

[Bladevane]

John,

Should be OK for you. Let me know if it works, or if it failed.

[jonhst]

Hi,

it worked perfectly !.

This is what i did
(win10) :

1) I copied the file : ems.dat.1935.txt
(https://www.mycncuk.com/attachment.p...0&d=1649730249)

as:
C:\Users\Administrator\AppData\Roaming\eMachineSho p\ems.dat

2) I used RunAsDate (https://www.nirsoft.net/utils/run_as_date.html)
to open emachineshop as date: 30/07/2019

3) I pressed Ctrl+Alt+e

Then i could save dxf files.

Thank you VERY MUCH, Bladevane !!!!

Kind Regards,
John

[Bladevane]

John, Briliant. Thanks for letting me know. Good luck in your file transfer. I now use FreeCAD for DXF transfer, although other packages are available.