1. #1
    Just found this for another member and thought I would share it with everyone else:

    I think generally any of the 30xx machines are ok to use as a learning platform, if users keep things real in terms of what they should expect from these machines it can be a win win situation.

    Engraving copper shouldn't be a problem as its quite a light task to do, for engraving from what I've seen, spindle speed set at around the 10,000rpm mark seems to work well.

    Have you seen this offer, there is 50% off at the moment, free shipping and at only 125 it seems ridiculously cheap not to get one to play around with !

    Sale Link: 3018 3 Axis Mini DIY CNC Router Standard Spindle Motor Wood Engraving Machine Milling Engraver

    Here is a review video:

    Last edited by Lee Roberts; 2 Weeks Ago at 01:47 PM. Reason: grammer
    .Me

  2. #2
    Would you think that a machine like this would be accurate enough to mark-out the centres of where holes are to be drilled in making Gantry side-plates?

  3. #3
    Sorry but it's like buying a kite to learn basics of flying.

    You need a proper mini mill at least to learn basics of machining. I wouldn't spend a single $ on a stuff like that. Also if you want a laser, buy a laser. All you say is a recipe for wasting money.
    project 1 , 2, Dust Shoe ...

  4. The Following 2 Users Say Thank You to Boyan Silyavski For This Useful Post:


  5. #4
    You can potentially get 6% cashback with topcashback too.

    I think it's worth noting that they say:
    "Engrave Wood, Plastic, Acrylic, PCB, or Similar Material
    Can Not Engrave Metal, Steel, Aluminum."
    So they're honest about its capability, or lack of it.

  6. #5
    These things will engrave metal including stainless you just have to go at it slowly. From my research there is a huge variety of CNC3018-Pro machines out there with differing control boards being the difference.
    Some have later driver chips on with a finer resolution, some appear tohave the row of pins A1 etc on the bottom disabled which is not helpful if you want to use a Z axis mapping function.
    For that reason I shall probably be buying the Sainsmart one which although a little more expensive has the latest iterations of components and supposedly reasonable customer support.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mini lathe as a 4th Axis
    By Leadhead in forum Gantry/Router Machines & Building
    Replies: 15
    Last Post: 24-08-2017, 07:53 AM
  2. Free shipping for a year
    By murrayg in forum General Discussion
    Replies: 0
    Last Post: 13-12-2016, 01:28 PM
  3. TTS type tooling ESS & free shipping
    By komatias in forum Manufacturer News
    Replies: 0
    Last Post: 10-02-2016, 09:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •