1. #1
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 12 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,281. Received thanks 262 times, giving thanks to others 6 times.
    So, I really need a lathe with rigid tapping ability and live tooling, but workshop space is restricted, and power supply sufficiently limited to rule out any cheap (aka big!) industrial options.

    I could upgrade my Denford Cyclone to get rigid tapping, but that would mean a period without a functioning lathe.

    A few months ago, while stood threading some parts on my much abused Clarke CL500, I thought the nice flat topped bed would be almost ideal to mount a couple linear rails on, and combine it with a gangtool setup would be somewhere in the ball park of what I'd need.
    But after a bit measuring/sketching, I came to the conclusion the bed would likely be too narrow once a reasonably sized cross slide is fitted and loaded up with my ideal amount of tooling.

    So letting the idea roll around in my head, the big issue is a suitable base. I'm not sure when I had the eureka moment, but that's where my recent post about Epoxy Granite comes in. Why don't I cast one?

    At the moment, I've got as far as sketching some rough spindle/bed shapes, and working on the list of things that will need to be allowed for in the base mould/cast I.e. ballscrew/motor mounts, cable routing, way cover mounting screws (aka the little details that could potentially cause big headaches!).
    I'm probably going to go for a slant bed build, as although it makes the casting/machining a bit more problematic, the swarf management is far better in the long term.

    I'm still very much undecided about the spindle mount. I'm likely to buy a spindle from China, but I'm not sure whether a steel weldment, or another EG cast would be better.

    So this thread is going to be somewhere to list my ideas/thoughts, and for anybody else to add in comments/advise/criticism (I already know this could be very likely end up in a reasonably expensive stupid idea!)
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.

  2. #2
    Doddy's Avatar
    Lives in Preston, United Kingdom. Last Activity: 11 Hours Ago Has been a member for 5-6 years. Has a total post count of 414. Received thanks 80 times, giving thanks to others 12 times.
    Can't offer anything other than the knowledge that I'll be following this thread with interest.

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. An idea for validation (CNC Lathe would this work)
    By lucan07 in forum General Discussion
    Replies: 4
    Last Post: 26-04-2016, 04:25 PM
  2. Website idea.
    By qwertyjon in forum General Discussion
    Replies: 18
    Last Post: 11-07-2014, 07:49 PM
  3. Website idea.
    By qwertyjon in forum General Computing
    Replies: 8
    Last Post: 05-04-2014, 02:29 PM
  4. Looking for a Lathe but no idea where to start.
    By Shinobiwan in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 12
    Last Post: 29-04-2013, 02:08 PM
  5. BUILD LOG: Mel's Odd Idea
    By mel_earp in forum DIY Router Build Logs
    Replies: 3
    Last Post: 19-03-2010, 10:54 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts