. .
  1. #1
    JimK's Avatar
    Lives in Cromer, Australia. Last Activity: 25-09-2019 Has been a member for 2-3 years. Has a total post count of 4.
    Hi All
    I have just installed the HY01D523B inverter and it drives the 1.5Kw motor ok but I wish to control the spindle on/off from a breakout board having a motor control relay. The diagram in the inverter manual shows the relay switching between FOR and DCM(COM). My relay is switching ok and the wiring is also ok so I think that the inverter settings are not correct. Does any one know what parameters need to be set to activate this function?

    JimK

  2. #2
    You have to go into the inverter settings and set pd001 to 1. This means start stop is controlled externally. See the manual for which buttons to press to get into the menu.
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Vfd settings
    By kwsb246 in forum General Discussion
    Replies: 2
    Last Post: 07-02-2019, 08:38 AM
  2. Huanyang VFD dl Error
    By charlieuk in forum Spindles & Drive Motors
    Replies: 7
    Last Post: 12-05-2017, 07:59 PM
  3. PWM Settings
    By Gunar in forum General Electronics
    Replies: 20
    Last Post: 16-02-2017, 12:33 PM
  4. Help with settings!
    By Tenson in forum General Discussion
    Replies: 26
    Last Post: 30-09-2012, 11:26 PM
  5. huanyang vfd 2.2 error E.CO.A
    By edgas10 in forum General Electronics
    Replies: 0
    Last Post: 01-07-2012, 08:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •