. .
Page 1 of 7 123 ... LastLast

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Noob needing a hand to trouble shoot what’s wrong with my machine.

    Info

    Syil x4
    Mach 3

    Was working fine up until moving it. Since reconnecting it to the pc - the pc has no control what so ever, as if the the cords not connected.

    I have
    - Checked all boards have power with a multi meter
    -checked the ports configured
    -checked the parallel cable is plugged in, checked continuity of cable and replaced the cable
    -replaced the pc (was on it way out anyway)
    -I jumped the COM and FWD pins on the inverter and the spindle starts (sunfar E300)
    -checked the diagnostics screen for life and no limit switch’s show, e-stop doesn’t show, is literally as if the machine is not plugged into the pc
    -Just ran the “config check” in Mach3 and seems “output 7” is configured wrong?

    Have read through a heap of threads but am really quiet clueless where to start looking, any input would be greatly appreciated
    Click image for larger version. 

Name:	IMG_0021.JPG 
Views:	515 
Size:	365.3 KB 
ID:	26254Click image for larger version. 

Name:	IMG_0032.JPG 
Views:	510 
Size:	404.0 KB 
ID:	26256Click image for larger version. 

Name:	09E95EDB-2126-4F6C-BEEA-795C6EEA629A.jpg 
Views:	525 
Size:	303.4 KB 
ID:	26255Click image for larger version. 

Name:	IMG_0017.JPG 
Views:	509 
Size:	356.9 KB 
ID:	26253Click image for larger version. 

Name:	IMG_0016.JPG 
Views:	541 
Size:	363.7 KB 
ID:	26252Click image for larger version. 

Name:	IMG_0015.JPG 
Views:	511 
Size:	387.6 KB 
ID:	26251Click image for larger version. 

Name:	IMG_0014.JPG 
Views:	508 
Size:	385.3 KB 
ID:	26250Click image for larger version. 

Name:	IMG_0013.jpg 
Views:	502 
Size:	253.3 KB 
ID:	26249Click image for larger version. 

Name:	IMG_0012.jpg 
Views:	480 
Size:	284.8 KB 
ID:	26248Click image for larger version. 

Name:	IMG_0011.jpg 
Views:	493 
Size:	286.3 KB 
ID:	26247

  2. #2
    What is selected under the motor outputs tab ? Possibly the output error relates to the motor control setup.
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  3. #3
    Quote Originally Posted by routercnc View Post
    What is selected under the motor outputs tab ? Possibly the output error relates to the motor control setup.
    Click image for larger version. 

Name:	IMG_0011.jpg 
Views:	581 
Size:	533.8 KB 
ID:	26273Click image for larger version. 

Name:	IMG_0011.jpg 
Views:	637 
Size:	529.9 KB 
ID:	26275Click image for larger version. 

Name:	IMG_0011.jpg 
Views:	559 
Size:	543.7 KB 
ID:	26274



    Sent from my iPhone using Tapatalk

  4. #4
    Quote Originally Posted by IhateDoug View Post
    Click image for larger version. 

Name:	IMG_0011.jpg 
Views:	581 
Size:	533.8 KB 
ID:	26273Click image for larger version. 

Name:	IMG_0011.jpg 
Views:	637 
Size:	529.9 KB 
ID:	26275Click image for larger version. 

Name:	IMG_0011.jpg 
Views:	559 
Size:	543.7 KB 
ID:	26274



    Sent from my iPhone using Tapatalk
    Not the ‘output’ tab, the ‘ motor output’ tab. Second tab from the left. This is where you set the motor ports and pins to control the motors.
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  5. #5
    Quote Originally Posted by routercnc View Post
    Not the ‘output’ tab, the ‘ motor output’ tab. Second tab from the left. This is where you set the motor ports and pins to control the motors.
    Dumb moment sorry - thanks for the input also really appreciate it
    Click image for larger version. 

Name:	IMG_0011.jpg 
Views:	604 
Size:	598.3 KB 
ID:	26276

  6. #6
    Quote Originally Posted by IhateDoug View Post
    Dumb moment sorry - thanks for the input also really appreciate it
    Click image for larger version. 

Name:	IMG_0011.jpg 
Views:	604 
Size:	598.3 KB 
ID:	26276
    Think you have them set wrong this is from a working machine:

    Click image for larger version. 

Name:	motor outputs.JPG 
Views:	642 
Size:	68.7 KB 
ID:	26278

  7. #7
    Edit - Nevermind :)
    Last edited by AndyUK; 22-08-2019 at 11:31 PM.

  8. #8
    Just noticed that the machine doesn’t have the charge pump connected - has jumper between pin 2-3. Could this have something to do with it?
    Click image for larger version. 

Name:	IMG_0105.jpg 
Views:	510 
Size:	228.1 KB 
ID:	26277

  9. #9
    Click image for larger version. 

Name:	IMG_0130.jpg 
Views:	266 
Size:	321.2 KB 
ID:	26283


    Sent from my iPhone using Tapatalk

  10. #10
    Other thing I noticed is this board kinda looks burnt?
    Click image for larger version. 

Name:	IMG_0133.jpg 
Views:	265 
Size:	280.3 KB 
ID:	26284


    Sent from my iPhone using Tapatalk

Page 1 of 7 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. syil x4
    By geoff in forum Machine Discussion
    Replies: 8
    Last Post: 30-11-2016, 07:35 PM
  2. FOR SALE: For Sale Syil X7 plus CNC Milling machine
    By dpcwright in forum Items For Sale
    Replies: 1
    Last Post: 13-09-2015, 02:27 PM
  3. Syil x4 or x5 as CAD/CAM training 4 axis CNC machine ???
    By towdi.arek in forum Marketplace Discussion
    Replies: 3
    Last Post: 20-07-2013, 07:26 AM
  4. What i am doing wrong with mach3?? trying to config machine.
    By scnc in forum Artsoft Mach (3 & 4)
    Replies: 39
    Last Post: 31-01-2013, 05:01 AM
  5. thinking about this Syil X5plus CNC Milling Machine with 4th Axis
    By Dellboy in forum Marketplace Discussion
    Replies: 8
    Last Post: 22-04-2012, 05:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •