. .
  1. #1
    Hi,

    This is my first post, sorry if i dont put as much information as needed, would be grateful for any help.

    I have a secondhand Boxford 250PC, have had it for 2 years, works as expected. It has sat unused due to lack of time for almost a year I think, and I have just tried to get working videos to sell it.

    The X+ overtravel sensor/ limit seems to be stuck on, and i cant figure out where it is to even begin to fault find with it. The error is coming up on the PC, and has limited the machine to X- jog slowly only, which is normal for an overtravel trigger. Normally you jog it off the sensor, then your free to use all the functions on the machine. But the X axis can be jogged all the way to the X- stop, and the sensor is still ON. Has anyone experienced this? or know where to find it? I have taken the cover off the turret and cant find anything obvious.

    Thanks!

  2. #2
    It's an old machine running an old control system with old parts and is about due a refurbishment.
    A good retro-fit with reliable quality equipment might make it worth the 4k you want for it.
    You think that's too expensive? You're not a Model Engineer are you? :D

  3. #3
    I just wanted to post the 'solution' to this, rather embarrassingly, I lubricated everything, and gave it all a really good clean. After not moving for some time it had just got a bit sticky!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WANTED: Boxford 250pc circuit board
    By Warden5 in forum Items Wanted
    Replies: 1
    Last Post: 10-06-2020, 10:06 PM
  2. Boxford 4th axis
    By Warden5 in forum Stepper & Servo Motors
    Replies: 14
    Last Post: 26-05-2016, 10:40 PM
  3. eBay: boxford 125-160 TCL chuck with spindle axis
    By sbdtasos in forum Items On eBay UK
    Replies: 0
    Last Post: 20-10-2015, 10:07 PM
  4. Replies: 22
    Last Post: 29-05-2015, 10:30 AM
  5. Boxford VMC 260 Z axis removal? Any ideas?
    By Roboteernat in forum Boxford Vertical Mills
    Replies: 1
    Last Post: 19-03-2015, 06:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •