. .
  1. #1
    Good morning Everyone
    I am a new member and trust I am placing this post in the correct place. I am trying to build a replacement computer for a Busellato Optima CNC, the computer is currently running Windows 95 and I do not have the original install disks. I have contacted Busellato service and they say they have lost their copy. Does anyone on the forum have a copy of these disks.
    Best wishes
    Chris Keohane

  2. #2
    Hi Chris,
    Your lucky thrown them in the recycle bin yesterday got them out now, let me have a contact e-mail please I have win 95, 2 off win 98 disks and boot disks also books with certificate install codes for each.

    Phill

  3. #3
    Quote Originally Posted by phill05 View Post
    Hi Chris,
    Your lucky thrown them in the recycle bin yesterday got them out now, let me have a contact e-mail please I have win 95, 2 off win 98 disks and boot disks also books with certificate install codes for each.

    Phill
    Good afternoon Phill
    Many thanks for your reply, I hope that I am writing in the correct place and was not expecting a positive response so quickly. My address is as detailed below.
    Castlepower Electronics
    Dunbeggan
    Dromore
    Bantry
    Co Cork
    Ireland P75 PK44

    Once again many thanks
    Chris Keohane

  4. #4
    Good afternoon Phill
    Many thanks for your reply, I was not expecting a positive response so quickly. I trust I am replying in the correct place this time, my address is as detailed below
    Castlepower Electronics
    Dunbeggan
    Dromore
    Bantry
    Co Cork
    Ireland
    P75 PK44
    Once again many thanks for taking the time to reply and retrieve the Disks

  5. #5
    Sorry Phill
    I forgot the email address of my reply
    info@castlepower.eu

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CNC Busellato Optima Software Problems
    By wes5283 in forum Machine Control Software
    Replies: 12
    Last Post: 30-07-2017, 08:24 AM
  2. Busellato Optima 55 programming
    By Scott44 in forum Machine Control Software
    Replies: 0
    Last Post: 01-06-2015, 01:32 AM
  3. New UK manufactured Lowcost Plasma table
    By adscnc in forum Manufacturer News
    Replies: 0
    Last Post: 03-05-2011, 04:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •