. .

Thread: New Member.

  1. #1
    Hi all i am a new member from Hjørring in Denmark.
    This spring i started buying stuff, to build a CNC router. Started with i stumbled over parts from a dismantled homebuild CNC router.
    And from there i started the building project - the stuff i stumbled over were motors - motor drivers - breakoutboard - leadscrews - and guidance bars and some more stuff.

  2. #2
    JanBo,
    Welcome to the forum. Sounds like you have plenty of parts to get started with. The trick is working out how to fit them all together! Plenty of help available on the forum for that.

    Kit
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.

  3. #3
    Hi Kit.
    Ty for the welcome, i found this forum searching for info about a chinese frequency converter set up - it should arrive soon - and i am pretty sure i found the set up in this forum - the CNC router is almost complete now - i posted it in DIY machines

    Jan

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •