. .
  1. Good afternoon everybody,

    My name is Ivan and I work at Puruvesi Automation, a Canadian company focused on manufacturing and developing the myCNC line of CNC motion controllers.

    Click image for larger version. 

Name:	et6-et7-et10.jpg 
Views:	292 
Size:	390.1 KB 
ID:	27008

    We provide solutions for plasma cutting and mill machines, as well as oxy-fuel amd tangential cutting setups. You can find more about our products on our website: https://www.pv-automation.com/

    To celebrate the New Year (albeit, a tad belatedly), the myCNC team wanted to offer the users of this forum 10% off their next purchase from our online shop. Just use the code MYCNCUK2020 to get 10% off your next purchase - the offer will be active until March 1, 2020.

    To find out more about our features and the advantages of using myCNC controllers visit our Main Advantages page.

    Best regards!
    Puruvesi Automation engineer working on the myCNC project.

  2. #2
    Thanks for the info. Personally i would not buy a product if i am not able to view the operational manual for both software and hardware in advance...:)

  3. #3
    Quote Originally Posted by ericks View Post
    Thanks for the info. Personally i would not buy a product if i am not able to view the operational manual for both software and hardware in advance...:)
    Nor me

  4. #4
    Quote Originally Posted by ericks View Post
    Thanks for the info. Personally i would not buy a product if i am not able to view the operational manual for both software and hardware in advance...:)
    Quote Originally Posted by johnsattuk View Post
    Nor me
    There is a pretty decent online manual that you can download the relevant parts you need to PDF if required. There are also other docs on parameters etc
    so don't see the problem.?

    Also have either of you tried asking for a manual, there may well be one available.?

    http://docs.pv-automation.com/

    https://www.pv-automation.com/wiki/p.../documentation

    https://www.pv-automation.com/wiki/pdf-files

  5. The Following 3 Users Say Thank You to JAZZCNC For This Useful Post:


  6. #5
    Quote Originally Posted by JAZZCNC View Post
    There is a pretty decent online manual that you can download the relevant parts you need to PDF if required. There are also other docs on parameters etc
    so don't see the problem.?

    Also have either of you tried asking for a manual, there may well be one available.?

    http://docs.pv-automation.com/

    https://www.pv-automation.com/wiki/p.../documentation

    https://www.pv-automation.com/wiki/pdf-files
    Thanks for the links. I initially checked out their site and was unable to find any documentation :)

  7. Quote Originally Posted by JAZZCNC View Post
    There is a pretty decent online manual that you can download the relevant parts you need to PDF if required. There are also other docs on parameters etc
    so don't see the problem.?

    Also have either of you tried asking for a manual, there may well be one available.?

    http://docs.pv-automation.com/

    https://www.pv-automation.com/wiki/p.../documentation

    https://www.pv-automation.com/wiki/pdf-files
    Hey @JazzCNC, thank you for the links!

    Quote Originally Posted by ericks View Post
    Thanks for the links. I initially checked out their site and was unable to find any documentation :)
    @ericks and @johnsattuk - we will make the documentation links more prominent on our website so that it's a little more clear where everything's located. Our online documentation at http://docs.pv-automation.com/ is where our manuals are featured in their most up-to-date form, and, as Jazz said, there is a button to download a pdf of each manual on the right side of each page. We update the wiki very often to make sure all the information stays relevant, and if you require any further information beyond what's already available, we're always happy to help.
    Puruvesi Automation engineer working on the myCNC project.

  8. #7
    Quote Originally Posted by ivan-mycnc View Post
    Hey @JazzCNC, thank you for the links!



    @ericks and @johnsattuk - we will make the documentation links more prominent on our website so that it's a little more clear where everything's located. Our online documentation at http://docs.pv-automation.com/ is where our manuals are featured in their most up-to-date form, and, as Jazz said, there is a button to download a pdf of each manual on the right side of each page. We update the wiki very often to make sure all the information stays relevant, and if you require any further information beyond what's already available, we're always happy to help.
    Thanks Ivan...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Height Mapping using myCNC controllers
    By ivan-mycnc in forum Manufacturer News
    Replies: 0
    Last Post: 19-11-2019, 05:26 PM
  2. NEW MEMBER: New to MYCNC and looking for help
    By Crafty Angel in forum New Member Introductions
    Replies: 0
    Last Post: 20-08-2016, 07:16 PM
  3. Probe-it / any users ?
    By dudz in forum CAD & CAM Software
    Replies: 8
    Last Post: 02-11-2015, 11:51 PM
  4. NEW MEMBER: New to mycnc
    By first timeER in forum New Member Introductions
    Replies: 2
    Last Post: 19-02-2015, 11:31 PM
  5. I'm guessing that peeps do have lives outside of MyCNC...
    By WandrinAndy in forum General Discussion
    Replies: 9
    Last Post: 06-09-2012, 10:03 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •