Stepper Driver Fault

[chas-SX3]

I'm trying to recommision my Syil SX3 after a long period of no use & I'm experiencing an intermittant fault LED on the Z axis stepper driver.

Before getting too technical, I have a spare stepper driver for the 4th axis which I will swap over but I was wondering if the fault could lie elsewhere & something is feeding back to the stepper driver?

[john swift]

Was the machine simply switched off and left unused or was move into storage ?

If its been stored in cold damp conditions
check the wiring for damage and connectors and Z axis stepper motor for corrosion


what's the stepper driver part number ?

first I would search for the stepper driver data to see what the fault LED could be indicating
( motor stall , over temperature , internal driver fault ? )

once your sure the wiring is OK
I would try connecting the Z axis motor to the spare driver

John

[chas-SX3]

I would try connecting the Z axis motor to the spare driver

John

Sorted now thx. Simple job to swap wiring over to the 4th axis driver but required a small child contortionist to get access back of the machine :-)

AFAIK the stepper driver is proprietry Syil, attached is Syils PDF& if I cannot source one do you know of any options?CNC_stepper_driver.pdf

[john swift]

for some reason apart from the photo on page 1 the pages in th syil manual are blank !

The photo of the driver reminds me of the Leadshine drivers usd by Tormach
the Tormach driver having a 10 pin box header instead of the usual 6 way connector for the step , direction and enable inputs


https://www.cnczone.com/forums/torma...r-pinouts.html



John

[cropwell]

Sorted now thx. Simple job to swap wiring over to the 4th axis driver but required a small child contortionist to get access back of the machine :-)

AFAIK the stepper driver is proprietry Syil, attached is Syils PDF& if I cannot source one do you know of any options?CNC_stepper_driver.pdf

I have three of them doing nothing but sitting in a drawer - I live in Cropwell Bishop, PM me if you want one or all of them. BTW they are Tonman drivers and obsolete.

[chas-SX3]

I have three of them doing nothing but sitting in a drawer - I live in Cropwell Bishop, PM me if you want one or all of them. BTW they are Tonman drivers and obsolete.

Oooh, yes please. Are they off a Syil SX3 ???

I'm only 20mls away so I could pick them up anytime. How £much do you want?

[cropwell]

PM sent