New(ish) Member from Torbay

[Ross77]

Hi Rob
Clive is referring to me. I work in Totnes so not to far away. I'm pretty busy but happy to help were I can. I haven't got a router but have cnc lathes and mills. Myself and a friend have just scratch built an 8 station ATC for a lathe but that wasn't rule of thumb. Absolutely solid and runs off a nema 17 stepper

https://photos.app.goo.gl/Yo6VCW2a8KGGR9Tm7

https://photos.google.com/photo/AF1Q...V4N7wfQ13eCPKI

PM your email and we can catch up

[Clive S]

Proper little group then don't forget the biscuits

[Fozz84]

Bourbon creams anyone!
Hi Ross, the second link is broken, but i am guessing, you can square up small steel parts and drill holes to fit stepper motors in? :p

[Ross77]

Bourbon creams anyone!

Pretty sure the currency is Hob Nobs

Ops, forgot to share that folder
https://photos.app.goo.gl/6HaRuef1GgcSDMXv8


Yes I milled the motor mount for the ATC on the Warco, if you have the models in fusion it should be a fairly easy task. trade for some routing