. .
  1. #1
    Hi all, well the big day has come - my 3020T CNC turned up and I've just got round to the unpack. Very excited to get started, but a few niggles have just dented my confidence a bit - hope you guys can help ...

    First the instructions are in German, no problem I speak a bit of German, but when I try to read it - it's obviously one of those " auto translated from Chinese into German instructions that don't make sense even if you're fluent.

    After a bit of Scrabbling I think I've found the English notes, or at least the "translated into English" notes - but only for the software !

    this brings me to point 2 - the Hardware comes with the steppers detached and obviously need installing - looks straightforward, but then things always do ! - Has anyone tried this assembly ? - Google doesn't seem to help me find assembly instructions, are all the steppers X,Y,Z Axes the same ? - which way round does the plastic mounting go (looks like it'll do either)?? etc.

    Final point - the sw instructions mention a USB to parallel port connections - but the kit comes with an arduino style USB cable - the controller has a socket for this - I'm assuming this is an alternative to the parallel port socket - is this right ??

    I can probably muddle my way through - or I could just end up mangling my new toy, so I thought I'd do the non-bloke thing and ask for some help and instructions - any pointers ?
    Last edited by Britannicus1; 3 Weeks Ago at 10:20 AM.

  2. #2
    I just found this - for those in a similar situation on assembly instructions

    https://www.youtube.com/watch?v=a5aqKVdtpI8

    Seems helpful - it's what I expected it to be but nice to have some reassurance

  3. #3
    are all the steppers X,Y,Z Axes the same ? - which way round does the plastic mounting go (looks like it'll do either)?? etc.
    The crystal ball is hazy . A few pics might help to clear the fog.
    ..Clive
    The more you know, The better you know, How little you know

  4. #4
    Quote Originally Posted by Britannicus1 View Post
    Hi all, well the big day has come - my 3020T
    3020 isn't a specific model from a specific manufacturer, it's a size/format definition like A4 for paper or AA for batteries, everybody and their dog knocks them out to a wide range of specifications and qualities.
    You think that's too expensive? You're not a Model Engineer are you? :D

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. My first CNC finally arrived! (6040)
    By d4cnc in forum Gantry/Router Machines & Building
    Replies: 11
    Last Post: 27-02-2016, 11:17 AM
  2. New machine arrived at port. almost here...
    By alboy in forum General Discussion
    Replies: 4
    Last Post: 04-09-2014, 09:40 AM
  3. VFD went pop today
    By Washout in forum Spindles & Drive Motors
    Replies: 4
    Last Post: 09-03-2014, 10:29 PM
  4. My spindle has arrived! a 1.5kw chinese jobby
    By Philly in forum Generic Chinese Spindles
    Replies: 5
    Last Post: 12-03-2013, 09:44 PM
  5. today i will be eating mostly Y axis
    By louie in forum Machine Discussion
    Replies: 3
    Last Post: 24-09-2010, 03:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •