. .
  1. #1
    Hi everybody,

    I am making progress on my DIY CNC, I have everything hooked up and it seems to be running well. I have actually made my first cut in three-quarter plywood. My feeds and speeds are off but nevertheless, I didn't break anything.

    Now I wanted to finish building my electronics cabinet and make everything somewhat organized, but I am struggling with finding the right components to finish everything. I am not familiar with the terminology that those who have experience know about.

    If you look at the attached picture you will see where I'm at currently so here are my questions:

    I live in the USA, I will be running 220 electrics to the box. What kind of the main switch should I put on here? I see some people use Rotary switches like this one.

    https://www.amazon.com/VictorsHome-C...7MZ756R2&psc=1

    I bought one of these, but I think I bought the wrong thing because the switch end up being a transfer switch not ON/OFF switch

    Should I have any kind of fuses where the main power is coming into the box?

    Should there be a fuse between the power supply and servomotors in case the power supply dies wouldn't want anything happening to those servomotors?

    What about the VFD I read on forums that I should have a power line filter like this one .

    https://www.mouser.com/ProductDetail...orVZ7FoA%3D%3D

    Any other suggestion anybody might have would be greatly appreciated.


    First cut here.
    https://www.youtube.com/watch?v=iFma...ature=youtu.be
    https://www.youtube.com/watch?v=HJTg...ature=youtu.be

    Thank you

    Darko
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Controler box.jpg 
Views:	117 
Size:	305.9 KB 
ID:	29386  

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Mach4 screw mapping
    By Husky1 in forum Artsoft Mach (3 & 4)
    Replies: 1
    Last Post: 14-12-2020, 09:14 AM
  2. 3 quick questions in regards to controller
    By Palletlad in forum General Electronics
    Replies: 1
    Last Post: 24-02-2018, 11:27 PM
  3. Mach4
    By D-man in forum Artsoft Mach (3 & 4)
    Replies: 3
    Last Post: 18-10-2014, 04:58 PM
  4. Replies: 7
    Last Post: 18-01-2014, 06:04 AM
  5. Mach3 vs Mach4
    By Saracen in forum Artsoft Mach (3 & 4)
    Replies: 42
    Last Post: 15-09-2013, 03:55 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •