Pumotix CNC software

[Clive S]

I have had a PLCM-E3 for a few years now. I have been running Mach3 and it seems to work OK.

Now I have changed PC and lost the plugin for this device. Is Purlogic still able to provide this plugin? I am building a new mnachine and need to use Mach3 just to get it set up. I am also looking at the Pumotix software and might test this if I can get the machine running.

If I can't get the plugin, I will be looking at an alternative controller and I propbably won't go any further with Pumotix.

Is this what you require : take the txt off the end of the file.

Link now removed

I will remove the link when you have it.

[Ali Kat]

Many thanks sir. It appears that this is what I need.

It meansd a long Sunday evening infront of the cathode tube but, hopefully, it will be worth it.

BTW - I haven't really go a cathod tube monitor (I don't think)

[Clive S]

Many thanks sir. It appears that this is what I need.

It meansd a long Sunday evening infront of the cathode tube but, hopefully, it will be worth it.

BTW - I haven't really go a cathod tube monitor (I don't think)

Glad to be of assistance. Link now removed