Changing spacing between Hiwin Carriages

[Sterob]

I downloaded some STEP files for some Hiwin Linear Rails with 2 Carriages.
I want to change the spacing between the carriages as they don't match my design. Anyone know how/if it can be done?

I can't see anyway to specifiy the distance when configuring the CAD file OR move the Carriages after it has been imported.
There must be a way?

Steve

[Neale]

Can you import separate models for the carriages and rails so that they are not in the same model?

[pippin88]

The Hiwin site has a configurator.

You can usually get the models in a format best suited for your CAD program (STEP is not always great).

Get the rails and cars as separate models and then mate/constrain them together as you desire in CAD.

[Sterob]

Didnt think of that....thanks guys.
I just assumed I would be able to edit them.
I will get separate rail and carriages models and carry on.....

Sent from my SM-G920I using Tapatalk

[Sterob]

The Hiwin site has a configurator.

You can usually get the models in a format best suited for your CAD program (STEP is not always great).

Get the rails and cars as separate models and then mate/constrain them together as you desire in CAD.

That did the trick,...thanks...
What file type do you recommend?

[Neale]

Whichever your CAD programme will accept? I'm pretty sure that Fusion 360 is happy with STEP although it's a while since I used it.

[Desertboy]

Not sure about anyone else but I used the data sheet rather than the cad models.

It has all the information you'd want hole spacing, length of carriage and height is all you really need.