. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-02-2020 #1
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 4 Weeks Ago Has been a member for 6-7 years. Has a total post count of 986. Received thanks 84 times, giving thanks to others 751 times.
    Hi, I finally dug my machine out and got it running, have a DDCSV 2.1 on the machine now

    What's going wrong?

    Mechanical or software?

    It's meant to look like this
    Click image for larger version.  Name: Test piece fusion.png  Views: 158  Size: 151.6 KB  ID: 27409

    Click image for larger version.  Name: Test piece fusion toolpath.png  Views: 179  Size: 265.0 KB  ID: 27410

    I cut it once, let the cut finish. Turned the power off and on again to machine and then repeated the same cut again next to it to see if I was losing steps.

    Click image for larger version.  Name: Test piece cnc.png  Views: 185  Size: 603.1 KB  ID: 27408

    2 cuts look identical to me.

    I used Fusion 360 to generate the Gcode.

    I have AM882's which have fault protection and if you drive them too fast they do fault but running the cut very slow 1m/min not getting any faults
    Adaptive clearing and contour for finishing pass.
    Last edited by Desertboy; 17-02-2020 at 03:58 PM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mach3 Problems problems problems.
    By ECCO in forum Artsoft Mach (3 & 4)
    Replies: 18
    Last Post: 09-07-2016, 10:07 AM
  2. circle cutting mach 3 problems help please
    By millmateuk in forum Artsoft Mach (3 & 4)
    Replies: 1
    Last Post: 13-06-2013, 07:04 AM
  3. Cutting problems on a gerber
    By martin54 in forum Machine Discussion
    Replies: 2
    Last Post: 01-06-2013, 09:07 PM
  4. Big problems with cutting HDPE can you help?
    By Nathan_Partington in forum Machine Discussion
    Replies: 2
    Last Post: 11-05-2012, 09:44 AM
  5. NEW MEMBER: MDF Problems
    By MrWiz73 in forum New Member Introductions
    Replies: 4
    Last Post: 31-12-2011, 12:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules