. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Ok thought I'd make a short video because I've had lots of people ask me about these Servo's and when I've asked what controller they use most come back with one that is in 100Khz region which just won't cut the mustard for a 3000rpm servo with 10K encoder count unless we do a bit of trickery in the drive.
    This video shows the trickery to get 100khz doing the job of 500khz and just how fu#king useless the Chinglish manual can be, which to be fair this chinglish manual is quite good.

    Anyway hope it helps some of you. (LEE: We need a component section or if we have one and I've missed it please move.)


  2. The Following 3 Users Say Thank You to JAZZCNC For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. The 2.2Kw Chinese Spindles - Info, Setup and Advice + More
    By Husky in forum Generic Chinese Spindles
    Replies: 222
    Last Post: 22-01-2021, 06:54 PM
  2. Servo Manuals - Chinese Sellers
    By Chaz in forum General Electronics
    Replies: 1
    Last Post: 30-04-2019, 12:12 PM
  3. Need a bit of help with servo settings/setup
    By alboy in forum General Discussion
    Replies: 1
    Last Post: 07-06-2018, 11:04 AM
  4. Rack & Pinion Gearbox/Gearing
    By andrewbond in forum Rack & Pinion Systems
    Replies: 21
    Last Post: 12-09-2015, 09:10 AM
  5. motor gearing (cog) help please
    By martin54 in forum Linear & Rotary Motion
    Replies: 5
    Last Post: 06-07-2013, 11:48 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •