. .
  1. #1
    As the title says This may be of interest as a tutorial general build video.

    It is Linuxcnc related but I did find it interesting:-

    https://forum.linuxcnc.org/47-hal-ex...t-video-series
    ..Clive
    The more you know, The better you know, How little you know

  2. The Following 2 Users Say Thank You to Clive S For This Useful Post:


  3. #2
    Clive - I don't want to lay any claim on this by cross-posting but it would be a fantastic resource to link to in the LinuxCNC section of of this board - be grateful if you could post the link there and better still if Lee can sticky it as a Hal reference - that's an area that is hard to get a cohesive set of info as a newbie. I know your interest here is not so much the HAL but it is still a useful link.


    (btw, off topic - but as our resident LinuxCNC expert, have you any experience of launching a python script on start-up of LinuxCNC to create a cyclic function that can grab the internal state data and drive the VCP HAL having created the necessary interface pins?, in particular I might be falling down this rabbit hole of a solution to get the DROs for the different G5x coordinate systems)... but learning LinuxCNC, VCP/GTK, HAL and Python at once is proving challenging)

  4. #3
    (btw, off topic - but as our resident LinuxCNC expert, have you any experience of launching a python script on start-up of LinuxCNC to create a cyclic function that can grab the internal state data and drive the VCP HAL having created the necessary interface pins?, in particular I might be falling down this rabbit hole of a solution to get the DROs for the different G5x coordinate systems)... but learning LinuxCNC, VCP/GTK, HAL and Python at once is proving challenging)
    Mike, do you have a translator for this I am certainly no expert. I have put the link into the appropriate section
    ..Clive
    The more you know, The better you know, How little you know

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need Help! Gerber System 48 Build Issues Video and Pictures Inside!
    By toby in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 14-08-2016, 12:55 PM
  2. BUILD LOG: Video Build log of Super Strong Router
    By mturneruk in forum DIY Router Build Logs
    Replies: 5
    Last Post: 07-01-2016, 11:06 AM
  3. BobCad-Cam 3D tutorial
    By craigrobbo in forum Computer Software
    Replies: 0
    Last Post: 21-09-2012, 05:20 PM
  4. Is there any interest in some castings
    By compositepro in forum Tool & Tooling Technology
    Replies: 17
    Last Post: 29-04-2012, 04:45 PM
  5. CNC Novice, Looking to build, little help? Design, Sourcing and General Help
    By kylelnsn in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 29-02-2012, 12:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •