-
29-03-2020 #1
Hi everybody,
I am new in building diy cnc and was trying to build my first cnc with about 1000mmx1600 work area.
To make long story short I purchased kit from linearmotionbearings2008 on eBay with all rails and ball nuts. The order arrived two days ago and as soon as I have seen the box that my stuff was shipped in, my heart sank and I thought I’m going to have a hart attack. 1600mm ball screws and 1700mm rails were shipped in the cardboard box with no support of any kind. I knew before opening the box that there is no way that this stuff is not bent. At minimum I assumed that this would be strapped on the flat wooden board if not in the wooden box.
Rails were ok.
You can see ball screws here
https://www.youtube.com/watch?v=nWTC94OZ6Kg
https://www.youtube.com/watch?v=BEqoHTzOugY
https://www.youtube.com/watch?v=gPOiML9lewo
https://www.youtube.com/watch?v=oQfAprs6s7g
https://www.youtube.com/watch?v=rVGNDr2U7o0
I have exchanged few emails with the seller and initiated return on eBay, he didn’t seem to care, offered me 50$ on 750$ order.
Is there anything I can do? Will going to eBay resolution solve anything, what about calling my credit card company?
If this is how this stuff is shipped how does he maintain 100% positive review on eBay. I can’t imagine this happened only to me.
I apologize for my broken English, I’m a foreigner living in US.
Any suggestions
Help ☹
-
The Following User Says Thank You to Darko For This Useful Post:
-
29-03-2020 #2
Take it up with eBay through their normal procedures - on the few occasions that I've had problems they've been generally helpful.
-
31-03-2020 #3
-
31-03-2020 #4
And no paper does not help!
-
The Following User Says Thank You to John McNamara For This Useful Post:
-
31-03-2020 #5
-
31-03-2020 #6
Voicecoil,
I've been wondering what business opportunities there are for portable bidet salespersons, but nobody else seems to have spotted the opportunity bar you and me.An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
-
31-03-2020 #7http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
31-03-2020 #8
And send them photos as well of course.
-
01-04-2020 #9
There seems to be a duplicate thread here. I replied to the other one and was puzzled later to see so many replies here - but not mine.
Perhaps the OP double posted?
-
01-04-2020 #10
Personaly i would have thought that slight bend you refer to would straighten out when fixed to cnc frame , ???
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
First cut in aluminium. Disaster.
By Edward in forum Metalwork DiscussionReplies: 28Last Post: 17-05-2017, 12:58 PM -
NEW MEMBER: Total Newbe to CNC
By tommyb43 in forum New Member IntroductionsReplies: 0Last Post: 29-12-2016, 09:53 PM -
NEW MEMBER: Total newbie.
By Blueflame2007 in forum New Member IntroductionsReplies: 6Last Post: 03-06-2016, 11:25 PM -
NEW MEMBER: Hello - total newbie!
By eggsBenedict in forum New Member IntroductionsReplies: 15Last Post: 05-01-2013, 12:47 AM -
HELP Gary, I'm having a disaster
By Robin Hewitt in forum Linear & Rotary MotionReplies: 3Last Post: 16-04-2009, 10:07 AM
Bookmarks