. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Gsuite V1.2

    I have posted about this before but I added some more programs so here is an update.

    Gsuite is a set of free gcode tools, mostly for PCB engraving. The source is provided with no license. Use it as you wish.

    Here is a summary of the content:

    I added some more programs. Here is an update.
    http://pilotpage.monosock.org/filead...suite_v1.2.rar

    Edit: v1.4 added:
    http://pilotpage.monosock.org/filead...suite_v1.4.rar


    Gflat v1.0 – Creates a milling pattern to flat the bed of the milling machine. It can generate both a conventional milling or climb milling path.


    Gopt 1.0 – Optimizes both drilling and milling paths. Tool changes are supported as well. This program is completely new and has different logic then existing optimization programs.


    Gpath v1.1– Removes close parallel tracks. This leaves only one track to be milled between pads which increases track quality. Handy for engraving fine pitch SMD IC's.


    Gskew v1.2– Compensates for skew or un-squareness in the milling machine. With some tweaking, the drill holes in the via's and pads can be aligned exactly. Handy for double sided PCB's.


    Gtime v1.1– Calculates the time it takes to finish the milling job. No more surprises. The job time is accurate to within about 10 minutes for large boards.

    Let me know what you think.
    Tjeerd
    Last edited by schouten_tjeerd; 13-04-2012 at 09:10 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Some Gcode generating programs
    By Jonathan in forum Programmers Corner
    Replies: 20
    Last Post: 28-02-2014, 07:58 AM
  2. Help needed for a 3d part gcode for mach3
    By Rebekah_harper in forum Computer Software
    Replies: 33
    Last Post: 04-11-2013, 01:55 AM
  3. gcode stops mid way can anyone test..
    By crossleymarko in forum CAD & CAM Software
    Replies: 16
    Last Post: 22-04-2012, 12:45 AM
  4. Tapping Gcode
    By Kai in forum General Discussion
    Replies: 10
    Last Post: 14-12-2010, 07:07 PM
  5. PLease help - gcode newbie
    By scotty in forum Programmers Corner
    Replies: 3
    Last Post: 07-03-2010, 12:48 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •