. .
  1. #1
    Sean F's Avatar
    Lives in Newcastle, United Kingdom. Last Activity: 2 Weeks Ago Has been a member for 0-1 years. Has a total post count of 4.
    Hi , i have just started using a rye twin head cnc router , I’ve not much experience with it and was after advice on setting the depth of the cutter. The control panel on the machine is a omicron 3000.
    1. First of all I went into the ‘toolbox ‘on the panel ,
    2. M/attr
    3 .lenth dia
    4.head select.
    5 this will lower the head (3)
    6 back to lenth dia
    7 this now will show ‘ tool 3 L/ offst
    8 I now use the left hand buttons to lower the head to required height , then press F1 to set the height.
    It will set now to the Z depth .
    9 I now press esc and the Z depth has went back to 1500,

    So I can’t seem to change the depth from the control panel . I’m sure I’m just missing something out . Any advice on how to do this .

  2. #2
    Hi Sean,
    I've also got a rye twin head CNC just started to try and get it running....
    Maybe put your post in the Rye category?

    Sent from my Mi A1 using Tapatalk

  3. #3
    https://r.tapatalk.com/shareLink?url...&share_type=sf


    Sent from my Mi A1 using Tapatalk

  4. #4
    What software/setup are you using?
    Thanks

    Sent from my Mi A1 using Tapatalk

  5. #5
    Sean F's Avatar
    Lives in Newcastle, United Kingdom. Last Activity: 2 Weeks Ago Has been a member for 0-1 years. Has a total post count of 4.
    Thanks, having a look now ��

  6. #6
    Hi Sean,

    Can you tell me which software you are using?

    And is your pc connected to the controller via an rs232 serial lead.

    Thanks Derek



    Sent from my Mi A1 using Tapatalk

  7. #7
    Did you get this sorted?
    what was the fix?
    thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 80mm Insert cutter face mill advice
    By northmeade in forum Tool & Tooling Technology
    Replies: 3
    Last Post: 09-09-2017, 08:37 PM
  2. Hypertherm plasma cutter advice.
    By T0rnado69 in forum Plasma Table Machines
    Replies: 11
    Last Post: 17-06-2016, 08:53 PM
  3. solidoworks tapped thread depth and blind hole depth
    By reefy86 in forum CAD & CAM Software
    Replies: 2
    Last Post: 10-11-2015, 03:14 PM
  4. fly cutter advice please
    By luke11cnc in forum Tool & Tooling Technology
    Replies: 13
    Last Post: 07-12-2014, 12:38 PM
  5. Trigonometry help please, plunge depth for a v cutter!
    By cncJim in forum Tool & Tooling Technology
    Replies: 13
    Last Post: 06-11-2013, 02:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •