. .
  1. #1
    I have a Zund Wild TA10BL plotter, the x and y motors are shot and we only used it as a vacuum bed (the plotting extents are 1800mm x 1670mm)
    There is a possibility this may be of use to someone as a project for converting to a CNC Table I am selling as a vacuum table only, with foot controller, vacuum pump and table (gantry is still attached as are all of the motors and control boards, but, the motors are shot at least) we are looking for 500.00 +vat you to dismantle and collect.

    Click image for larger version. 

Name:	WILD TA10BL.jpg 
Views:	218 
Size:	294.1 KB 
ID:	28634

  2. #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom. Last Activity: 10 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 7,560. Received thanks 1,304 times, giving thanks to others 83 times.
    Would make a nice quick conversion to a router lads, Zund are high quality so it won't have rubbish rails etc fitted. Certainly worth a look if you live close.!!
    -use common sense, if you lack it, there is no software to help that.

  3. The Following User Says Thank You to JAZZCNC For This Useful Post:


  4. #3
    Just a final call to see if there is any interest, or, I will strip it down and sell the components off and scrap the rest............. seems a shame when it has the excellent basis for a quick conversion for someone
    If there is no requirement, I will strip it down on Friday

    Andy

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Using belts for large format machines
    By scott88 in forum General Discussion
    Replies: 4
    Last Post: 16-06-2020, 08:32 PM
  2. Large Format Epoxy Granite Gantry CNC - Looking For Feedback
    By Max Maker in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 23-08-2019, 03:57 PM
  3. Large Format Steel Framed Router
    By nathandavies in forum Gantry/Router Machines & Building
    Replies: 2
    Last Post: 07-02-2016, 01:51 PM
  4. BUILD LOG: First CNC Project - 3 Axis - Large table format
    By Xavi in forum DIY Router Build Logs
    Replies: 2
    Last Post: 01-12-2015, 09:44 PM
  5. format 4 Profit H08
    By alexfindlater in forum Machine Discussion
    Replies: 3
    Last Post: 10-07-2015, 02:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •