. .
  1. #1
    Hi,
    Does anyone know of a UK supplier of decent 1 and/or 2mm diameter ballnose carbide cutters for aluminium with a flute length around 10mm?

  2. #2

  3. #3
    Quote Originally Posted by phill05 View Post
    I can only see their 1mm ballnose with a flute length of 2mm ?
    https://www.shop-apt.co.uk/ball-nose...d-carbide.html

  4. #4
    Doddy's Avatar
    Lives in Preston, United Kingdom. Last Activity: 11 Hours Ago Has been a member for 6-7 years. Has a total post count of 900. Received thanks 136 times, giving thanks to others 38 times. Referred 1 members to the community.
    1mm with a 10mm flute?, I'll like to watch a video of you cutting with those... without swearing!

    https://www.shop-apt.co.uk/2-flute-l...ong-55hrc.html

    Long neck - not full length flutes. Don't know if that helps?

  5. #5
    Quote Originally Posted by Doddy View Post
    1mm with a 10mm flute?, I'll like to watch a video of you cutting with those... without swearing!

    https://www.shop-apt.co.uk/2-flute-l...ong-55hrc.html

    Long neck - not full length flutes. Don't know if that helps?
    I have tried those thanks but they tend to gum up when used on aluminium. I have found long neck but they are in the order of 25 each so was hoping to find some cheaper.
    For your entertainment here is a video of a 2mm tool cutting.


  6. #6
    Try looking for router bits rather than milling cutters perhaps?

    https://www.rennietool.co.uk/product...smart_campaign

  7. #7
    I bought some of these (but flat end) for a job I never did, so I can't tell you how good they are in ali.

    https://www.aliexpress.com/item/3296...14b32917ArcyeD

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Down cut carbide cutters
    By Leadhead in forum Marketplace Discussion
    Replies: 2
    Last Post: 22-02-2016, 02:07 PM
  2. FOR SALE: Dormer Carbide Milling Cutters
    By ricey3 in forum Items For Sale
    Replies: 5
    Last Post: 13-01-2016, 11:25 PM
  3. Carbide cutters
    By Web Goblin in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 24-01-2014, 09:57 AM
  4. Single flute carbide cutters
    By Jonathan in forum Tool & Tooling Technology
    Replies: 52
    Last Post: 11-11-2011, 05:48 PM
  5. Cheap carbide cutters
    By HiltonSteve in forum Tool & Tooling Technology
    Replies: 6
    Last Post: 30-07-2009, 07:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •