-
31-08-2020 #1
I am looking for a UK stockist of a Sanyo Denki 103H7124-0440 UK and am not having much luck.
Can anyone point me to a supplier or suggest a suitable replacement available in the UK?
Full specs for the stepper are available here
https://search.sanyodenki.comhttps:/...OTION_F2_E.pdf
-
31-08-2020 #2
That link is scrambled. Try this https://www.sanyodenki.com/archive/d...OTION_F2_E.pdf
Page 52. 56 mm sq. 1.8°/step Unipolar winding, Lead wire type, ~1Nm, 2A, 3.1mH
-
31-08-2020 #3
There's a slightly lower torque version of it on Irish ebay ATM - 0.83Nm instead of 0.98Nm. https://www.ebay.co.uk/itm/SANYO-DEN...AAAOSwYgRZlwF2
Can't you find an equivalent motor from an alternative supplier? These come in reasonably std frame sizes.
-
31-08-2020 #4
Thanks. I would rather go up in torque an new to all this hence making sure I get it right.
My drivers are Stepper Motor Driver 6.0A, 80V CNC Microstepping CW8060 from cnc4you. I have enough space so am I correct that this unit will do? M57STH76-2808S as listed on https://www.motioncontrolproducts.co...tepper-motors/
Thanks
-
31-08-2020 #5
It looks about right to me but I'm not the expert on steppers. Certainly, the inductance and dimensions look compatible from what I can make out.
Perhaps somebody else could give an opinion?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Bulb replacement
By calida in forum Laser Machines & BuildingReplies: 1Last Post: 19-01-2016, 11:03 PM -
FOR SALE: 3 nema 23 sanyo denki motors 56mm 3a - 3 4.5a tb6600 36v drives - one 36v psu £125
By nobby in forum Items For SaleReplies: 0Last Post: 27-06-2014, 10:24 PM -
FOR SALE: 3 nema23 sanyo 3a 6.35 shaft 4 wire motors - 3 3a 24v 6560 drivers - 24v 15a psu £100
By nobby in forum Items For SaleReplies: 0Last Post: 22-06-2014, 01:59 PM -
Sanyo Denki stepper motors
By djk in forum Stepper & Servo MotorsReplies: 14Last Post: 26-04-2013, 09:27 PM -
NEW MEMBER: Sanyo Seiki
By SanyoSeiki in forum New Member IntroductionsReplies: 0Last Post: 08-02-2012, 08:33 AM
Bookmarks