Thread: Z Problem

  1. #1
    Hi new to this so please bear with me.
    have a problem when cutting multi passes on the z.
    all runs fine and then it will add 10mm plunge on the z.
    getting use to g code cant see a problem there

    please any reson why it would do this

    thanks Airwolf:feedback:

  2. Quote Originally Posted by airwolf View Post
    Hi new to this so please bear with me.
    have a problem when cutting multi passes on the z.
    all runs fine and then it will add 10mm plunge on the z.
    getting use to g code cant see a problem there

    please any reson why it would do this

    thanks Airwolf:feedback:
    Can you post your G-Code?

  3. #3
    Hi This is The G code
    Code:
    (BEGIN PREDATOR NC HEADER)
    (MACH_FILE=3AXVMILL_MM.MCH)
    (MTOOL T1 S1 D6.3 H6.5 DIAM_OFFSET 1 = 3.15)
    (SBOX X0. Y0. Z-18. L994.484 W400.144 H0.)
    (END PREDATOR NC HEADER)
    
    %
    O100
    (PROGRAM NUMBER)
    (PROGRAM NAME - LOUIE TABLECURVE.NC)
    (POST -  MACH 3 ROUTER METRIC)
    (DATE - MON. 11/09/2009)
    (TIME - 07:23AM)
    
    N01 G21 G40 G49 G54 G80 G90 G91.1
    N02 G53
    
    (JOB 1  CONTOUR)
    (FEATURE PROFILE)
    
    N03 T1
    N04 S2525 M03
    N05 G00 G90 G54  Z5. X994.484 Y1.198
    N07 G01 Z-4.5 F256.6032
    N08 Y70.854 F500.3763
    N09 X975.392 Y140.349
    N10 X946.875 Y200.947
    N11 X907.91 Y256.916
    N12 X858.208 Y305.156
    N13 X802.507 Y344.733
    N14 X739.259 Y374.54
    N15 X672.688 Y393.56
    N16 X618.548 Y400.144
    N17 X586.813 Y399.238
    N18 X530.816 Y393.494
    N19 X461.609 Y375.635
    N20 X403.473 Y347.919
    N21 X341.625 Y305.894
    N22 X292.465 Y256.734
    N23 X254.658 Y203.671
    N24 X224.21 Y140.006
    N25 X204.466 Y71.801
    N26 Y.416
    N27 G00 Z5.
    N28 X994.484 Y1.198
    N29 Z.5
    
    (JOB 1  CONTOUR)
    (FEATURE PROFILE)
    
    N30 S2525
    N31 X994.484 Y1.198
    
    N32 G01 Z-9. F256.6032
    N33 Y70.854 F500.3763
    N34 X975.392 Y140.349
    N35 X946.875 Y200.947
    N36 X907.91 Y256.916
    N37 X858.208 Y305.156
    N38 X802.507 Y344.733
    N39 X739.259 Y374.54
    N40 X672.688 Y393.56
    N41 X618.548 Y400.144
    N42 X586.813 Y399.238
    N43 X530.816 Y393.494
    N44 X461.609 Y375.635
    N45 X403.473 Y347.919
    N46 X341.625 Y305.894
    N47 X292.465 Y256.734
    N48 X254.658 Y203.671
    N49 X224.21 Y140.006
    N50 X204.466 Y71.801
    N51 Y.416
    N52 G00 Z5.
    N53 X994.484 Y1.198
    N54 Z-4.
    
    (JOB 1  CONTOUR)
    (FEATURE PROFILE)
    
    N55 S2525
    N56 X994.484 Y1.198
    
    N57 G01 Z-13.5 F256.6032
    N58 Y70.854 F500.3763
    N59 X975.392 Y140.349
    N60 X946.875 Y200.947
    N61 X907.91 Y256.916
    N62 X858.208 Y305.156
    N63 X802.507 Y344.733
    N64 X739.259 Y374.54
    N65 X672.688 Y393.56
    N66 X618.548 Y400.144
    N67 X586.813 Y399.238
    N68 X530.816 Y393.494
    N69 X461.609 Y375.635
    N70 X403.473 Y347.919
    N71 X341.625 Y305.894
    N72 X292.465 Y256.734
    N73 X254.658 Y203.671
    N74 X224.21 Y140.006
    N75 X204.466 Y71.801
    N76 Y.416
    N77 G00 Z5.
    N78 X994.484 Y1.198
    N79 Z-8.5
    
    (JOB 1  CONTOUR)
    (FEATURE PROFILE)
    
    N80 S2525
    N81 X994.484 Y1.198
    
    N82 G01 Z-18. F256.6032
    N83 Y70.854 F500.3763
    N84 X975.392 Y140.349
    N85 X946.875 Y200.947
    N86 X907.91 Y256.916
    N87 X858.208 Y305.156
    N88 X802.507 Y344.733
    N89 X739.259 Y374.54
    N90 X672.688 Y393.56
    N91 X618.548 Y400.144
    N92 X586.813 Y399.238
    N93 X530.816 Y393.494
    N94 X461.609 Y375.635
    N95 X403.473 Y347.919
    N96 X341.625 Y305.894
    N97 X292.465 Y256.734
    N98 X254.658 Y203.671
    N99 X224.21 Y140.006
    N100 X204.466 Y71.801
    N101 Y.416
    N102 G00 Z5.
    N103 M05
    N104 G53 Z50.
    N105 G53 X0. Y0.
    N106 M02
    
    (END OF PROGRAM)
    
    N107 M30
    %
    Thanks Airwolf
    Last edited by Lee Roberts; 11-11-2009 at 02:01 AM. Reason: Placed his gcode into tags.

Similar Threads

  1. Powertran VFD problem
    By phill05 in forum Spindles & Drive Motors
    Replies: 7
    Last Post: 29-10-2013, 07:59 PM
  2. Bearing fit problem
    By paulus.v in forum Linear & Rotary Motion
    Replies: 7
    Last Post: 09-10-2013, 09:54 AM
  3. Problem with X
    By gorbo in forum General Discussion
    Replies: 17
    Last Post: 24-02-2011, 05:33 AM
  4. z axis problem
    By rickybabe in forum Linear & Rotary Motion
    Replies: 3
    Last Post: 28-04-2010, 09:04 AM
  5. Problem with calibration
    By m.marino in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 22-04-2010, 04:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •