. .
  1. #1
    Has any one used one of the autolube pumps form ebay?

    like THIS ONE

    Its for a Nova mill so should be ok size wise but not sure on reliability etc.

  2. The Following User Says Thank You to Ross77 For This Useful Post:


  3. #2
    Sorry, I'd like to help but checking with one of our clients, who get parts from us, and learnt that he does not have idea about this.
    Pintuu

  4. #3
    I've fit a few of those Ross and they are ok for the money. One of them is nearly 3yrs old and still going.
    -use common sense, if you lack it, there is no software to help that.

  5. #4
    Thanks Dean, I suppose the other option is to just have a pump controlled by the Acorn (or Mesa) board. Are there any specific pumps that will do the job?

    Looking on eBay there are the 12v fuel pumps that look to big or the smaller peristaltic pumps which have the required flow rate but I'm not sure would generate enough pressure.

    Are there any other options that you use on your builds?

  6. #5
    Quote Originally Posted by Ross77 View Post
    Thanks Dean, I suppose the other option is to just have a pump controlled by the Acorn (or Mesa) board. Are there any specific pumps that will do the job?

    Looking on eBay there are the 12v fuel pumps that look to big or the smaller peristaltic pumps which have the required flow rate but I'm not sure would generate enough pressure.

    Are there any other options that you use on your builds?
    It's been about 2yrs since I last fit one but I'm sure you can get one or config it for a One-shot setup, where you pulse it and it pumps for a set time. You don't have to use the auto timer option.

    I don't fit many and often they are the cheaper lever pump types to keep costs and complexity down.
    -use common sense, if you lack it, there is no software to help that.

  7. The Following User Says Thank You to JAZZCNC For This Useful Post:


  8. #6
    These reliable systems include state-of-the-art controller and monitoring options, pumps, injectors, divider valves and numerous other customisable accessories

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Spec me some lube!
    By JOGARA in forum General Discussion
    Replies: 3
    Last Post: 07-03-2018, 11:44 AM
  2. eBay: 5.5kW Vacuum pumps for largeish CNC router
    By Jonathan in forum Items On eBay UK
    Replies: 0
    Last Post: 04-02-2018, 05:23 PM
  3. Bridgeport Lube?
    By Davek0974 in forum Bridgeport Milling Machines
    Replies: 22
    Last Post: 07-06-2016, 11:50 AM
  4. eBay: 2 Vacuum Pumps, Vaccum Motors, 3phase 5.5HP, CNC Bed, suction
    By kingcreaky in forum Items On eBay UK
    Replies: 0
    Last Post: 18-07-2013, 02:20 PM
  5. any one know about auto lube systems?
    By graffian in forum Milling Machines, Builds & Conversions
    Replies: 0
    Last Post: 02-03-2009, 04:52 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •