. .
Page 11 of 14 FirstFirst ... 910111213 ... LastLast
  1. #101
    First we put the flange on the machine and made holes in it so we can use them later as a center for alignment for milling the arcs of the part.
    And start with roughing .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	348.jpg 
Views:	317 
Size:	133.6 KB 
ID:	3064   Click image for larger version. 

Name:	349.jpg 
Views:	275 
Size:	127.6 KB 
ID:	3063   Click image for larger version. 

Name:	329.jpg 
Views:	293 
Size:	136.7 KB 
ID:	3065  

  2. #102
    After making sure the workpiece is in the center of the machine I started with
    roughing the outer arc.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	340.jpg 
Views:	261 
Size:	129.4 KB 
ID:	3069   Click image for larger version. 

Name:	346.jpg 
Views:	220 
Size:	123.5 KB 
ID:	3067  

  3. #103
    After that we are roughing the cylindrical section and then turn over the workpiece and cut away the biggest arc.
    But first we made the small arc .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	353.jpg 
Views:	255 
Size:	129.9 KB 
ID:	3072   Click image for larger version. 

Name:	327.jpg 
Views:	280 
Size:	126.1 KB 
ID:	3070   Click image for larger version. 

Name:	326.jpg 
Views:	250 
Size:	133.6 KB 
ID:	3071  

  4. #104
    After finishing the outer arc the arc shaped slots ware made.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	350.jpg 
Views:	248 
Size:	131.9 KB 
ID:	3073   Click image for larger version. 

Name:	336.jpg 
Views:	229 
Size:	138.5 KB 
ID:	3074  

  5. #105
    In a later stage the piece is taken in the chuck of my lathe.
    The first operations are facing of and drilling .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	361.jpg 
Views:	284 
Size:	124.9 KB 
ID:	3075   Click image for larger version. 

Name:	351.jpg 
Views:	369 
Size:	135.7 KB 
ID:	3076   Click image for larger version. 

Name:	332.jpg 
Views:	392 
Size:	127.2 KB 
ID:	3077  

  6. #106
    With a other tool we made the chamber for the motor.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	345.jpg 
Views:	266 
Size:	124.9 KB 
ID:	3078   Click image for larger version. 

Name:	356.jpg 
Views:	268 
Size:	125.7 KB 
ID:	3079   Click image for larger version. 

Name:	344.jpg 
Views:	256 
Size:	123.7 KB 
ID:	3080  

  7. #107
    After turning over the workpiece the other side is machined .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	330.jpg 
Views:	235 
Size:	135.8 KB 
ID:	3081  

  8. #108
    Now the workpiece is going back to the milling machine and it is centered and holes ware made in to it so the motor can be attached .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	355.jpg 
Views:	302 
Size:	129.6 KB 
ID:	3082   Click image for larger version. 

Name:	354.jpg 
Views:	276 
Size:	133.9 KB 
ID:	3083  

  9. #109
    In to the side of the flange a tapped hole is made to attach a handle for tightening the belt of the motor.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	342.jpg 
Views:	265 
Size:	134.5 KB 
ID:	3084  

  10. #110
    now the motor flange is ready for paint.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	359.jpg 
Views:	266 
Size:	132.9 KB 
ID:	3085   Click image for larger version. 

Name:	339.jpg 
Views:	271 
Size:	126.8 KB 
ID:	3086  

Page 11 of 14 FirstFirst ... 910111213 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CONVERSION: Archdale Conversion
    By meyerga00 in forum Conversion Build Logs
    Replies: 0
    Last Post: 17-06-2012, 09:24 AM
  2. Mill conversion to cnc
    By wolsey in forum General Discussion
    Replies: 1
    Last Post: 15-08-2011, 11:07 PM
  3. Bridgeport Conversion
    By Tony Goodwin in forum Bridgeport Milling Machines
    Replies: 0
    Last Post: 08-08-2011, 08:11 AM
  4. Sieg sx2 conversion kit
    By Goldigger in forum Milling Machines, Builds & Conversions
    Replies: 3
    Last Post: 24-04-2011, 07:42 PM
  5. A little conversion tool
    By D-man in forum Computer Software
    Replies: 1
    Last Post: 18-12-2010, 04:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •