. .
  1. #1
    Hi everyone, through the help of (Roboteernat ) a member on here, I’ve recently got round to doing some needed mods to my Boxford VMC and would personally like to thank him again for his help.

    I have also been given some support from a friend who is not a member on here, but has given me a wealth of information on detailed wiring diagrams and modifications for a Boxford vmc 300 Upgraded to Mach4, he has also given me permission to share his work and findings if it will help anyone, as it has helped me

    https://trialsandsetbacks.files.word...ring-mods.docx (please note the file is 50mb and will need microsoft office to open)

    Best regards Walter

    Attachment 28939Attachment 28940Attachment 28939Attachment 28940
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	2019.jpg 
Views:	184 
Size:	266.8 KB 
ID:	28942   Click image for larger version. 

Name:	20191227_172322.jpg 
Views:	192 
Size:	211.7 KB 
ID:	28941  

  2. #2
    Quote Originally Posted by walter67 View Post
    Hi everyone, through the help of (Roboteernat ) a member on here, I’ve recently got round to doing some needed mods to my Boxford VMC and would personally like to thank him again for his help.

    I have also been given some support from a friend who is not a member on here, but has given me a wealth of information on detailed wiring diagrams and modifications for a Boxford vmc 300 Upgraded to Mach4, he has also given me permission to share his work and findings if it will help anyone, as it has helped me

    https://trialsandsetbacks.files.word...ring-mods.docx (please note the file is 50mb and will need microsoft office to open)

    Best regards Walter

    Attachment 28939Attachment 28940Attachment 28939Attachment 28940

    Walter,

    Thanks for the helpful wiring information. I am considering upgrading my VMC300 machine as well. I recently had a drive motor fail and since the machine is already 20 years old I think its time for a refresh. I

    Are you able to provide any helpful info on what you went with and can you also tell me how the machine has been performing since the refresh you did last year? Thank you Sir.

    Brian

  3. #3
    Quote Originally Posted by walter67 View Post
    Hi everyone, through the help of (Roboteernat ) a member on here, I’ve recently got round to doing some needed mods to my Boxford VMC and would personally like to thank him again for his help.

    I have also been given some support from a friend who is not a member on here, but has given me a wealth of information on detailed wiring diagrams and modifications for a Boxford vmc 300 Upgraded to Mach4, he has also given me permission to share his work and findings if it will help anyone, as it has helped me

    https://trialsandsetbacks.files.word...ring-mods.docx (please note the file is 50mb and will need microsoft office to open)

    Best regards Walter

    Attachment 28939Attachment 28940Attachment 28939Attachment 28940
    Walter,

    I have a VMC300 that I am looing to convert as you did. I have a few questions if you have time to discuss. Thanks for the wiring info BTW. I would love to know your thoughts on the update and if it is worth it or if the machine is still running good. Cheers

    Brian

  4. #4
    Quote Originally Posted by balongshore View Post
    Walter,

    I have a VMC300 that I am looing to convert as you did. I have a few questions if you have time to discuss. Thanks for the wiring info BTW. I would love to know your thoughts on the update and if it is worth it or if the machine is still running good. Cheers

    Brian
    Hi Brian,

    Welcome to the forum!

    I've noticed that Walter was last active on 09-10-2020 so he is more than likely not aware of your posts to this thread. In such circumstances, your best way to make contact may be to send an Email or Personal-Message to him by clicking on his username . . . . . .

    BUT you have to have a minimum number of posts to be allowed to do this, so it would be worthwhile creating your own new thread in Member Introductions and making a number of "dummy" posts there to get to the required number of posts. I think 10 posts are required and your current post count is 2.

    Good luck,
    Andy

  5. #5
    Andy,


    Ok thank you for that information.

  6. #6
    Sent a PM

    Walter

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Boxford vmc300 fault diagnosis
    By Andyvmc300 in forum Boxford Vertical Mills
    Replies: 1
    Last Post: 14-08-2021, 08:34 PM
  2. CONVERSION: boxford vmc 300 mach3 conversion
    By bigred5765 in forum Conversion Build Logs
    Replies: 14
    Last Post: 05-07-2018, 06:05 PM
  3. My Boxford 300VMC COnversion
    By Proteus in forum Boxford Vertical Mills
    Replies: 3
    Last Post: 19-03-2018, 04:59 PM
  4. Boxford VMC300 conversion & parts. Help really needed.
    By Proteus in forum Boxford Vertical Mills
    Replies: 0
    Last Post: 13-09-2016, 02:13 PM
  5. Boxford 160 to pc conversion
    By keith wainwright in forum Boxford Lathes
    Replies: 2
    Last Post: 24-04-2015, 09:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •