. .
Page 1 of 9 123 ... LastLast
  1. #1
    Hi All

    I see there are a lot of posts to go through about this machine so i am not asking at the moment :-)

    It will arrive next week and i can go over it and in the meantime read up and see whether the recommendations are to leave as is or get it up to date.

    So why am i posting? well i am bound to need help even with the posts so its only fair that i can make an offer too anyone on this forum.

    I read the comments about old PC's being used/needed, well i currently scrap lots of old style PC,s regular so if anyone want to pay postage i am happy to see if i can help, (hoping i don't get a flood :-) ) but by all means drop in here or pm and i will accommodate if possible

    Malc

  2. #2
    Hi Bernie
    Happy to help if I can. Although most on here are far more experienced than i am

    I have put together a CNC mill of sorts using a compound table on my old German mill, and am now on a project with a Boxford TCL 125. I failed to get it going on the Boxford boards .

    I will be looking for a PC shortly as I am being told I need to Install Linux and best to do so on a "clean machine "
    It seems linux does not need anything upmarket so if you have something you think might be suitable I would be interested .
    Postage would not be a problem. And recycling is good!

  3. #3
    Hi John
    Just this minute finished ready your posts :-), some good help there from the forum.
    I am happy to supply a PC to you, do you want me to give spec range or easier just let me know the min you want for linux

    Malc

  4. #4
    Hi Malc and thankyou.

    I havent even got to thinking about what I need . I did fall foul of a graphics problem with UCCNC on my mill with poor graphics spec on a Dell SFF. But I dont know whether Linux CNC is very demanding on graphics . Maybe one of the other guys will step in and help but I dont want to hijack your thread .

    I will try to do some research

    John

  5. #5
    jack away as it will contribute and i read everything i can anyway :-)

    I can probably put a spec up tomorrow on here for all and sundry :-)

  6. #6
    I understand that one of the primary considerations is a parallel port so bound to be an oldish spec , and someone suggested two ports are better than one .
    No doubt an extra port can be added though.

  7. #7
    Might have some parallel cards lying around, will check

  8. #8
    Other than that

    http://www.linuxcnc.org/docs/html/ge...uirements.html

    I expect some of the guys here will add to that
    Last edited by John11668; 11-10-2020 at 07:39 PM.

  9. #9
    i can meet that

  10. Quote Originally Posted by John11668 View Post
    Other than that

    http://www.linuxcnc.org/docs/html/ge...uirements.html

    I expect some of the guys here ill add to that
    John/Bernie, Not wanting to tread on anyone's toes here, but if you wanted to look at LinuxCNC, then you're more likely to want to meet the OS requirements for a modern installation, the Desktop version of Ubuntu 20 comes at:-

    (Source: https://help.ubuntu.com/community/In...emRequirements)

    "Ubuntu Desktop Edition
    2 GHz dual core processor
    4 GiB RAM (system memory)
    25 GB of hard-drive space (or USB stick, memory card or external drive but see LiveCD for an alternative approach)
    VGA capable of 1024x768 screen resolution
    Either a CD/DVD drive or a USB port for the installer media
    Internet access is helpful"

    LinuxCNC doesn't need much in the way of graphics support.

  11. The Following User Says Thank You to Doddy For This Useful Post:


Page 1 of 9 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. FOR SALE: Boxford MT2 & Boxford TCL125
    By jonnydeen in forum Items For Sale
    Replies: 2
    Last Post: 14-09-2020, 09:41 AM
  2. New Spindle drive Boxford V190 VMC
    By mosoeng in forum Boxford Vertical Mills
    Replies: 4
    Last Post: 19-09-2019, 09:11 AM
  3. SOLD: Boxford 260 VMC
    By Woodfish in forum Items For Sale
    Replies: 6
    Last Post: 11-12-2018, 08:34 PM
  4. Replies: 2
    Last Post: 21-04-2016, 09:18 AM
  5. Boxford mt2
    By Hellfire in forum Boxford Lathes
    Replies: 6
    Last Post: 03-08-2012, 08:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •