. .
Page 1 of 2 12 LastLast
  1. #1
    Wal's Avatar
    Lives in Stockport, United Kingdom. Last Activity: 15 Hours Ago Has been a member for 8-9 years. Has a total post count of 477. Received thanks 60 times, giving thanks to others 26 times.
    Hello all,

    Had a load of long-lozenge shaped construction ply off-cuts left over from a recent job and thought it a shame to bin 'em. Picked up some 14mm (10mm ID) tube for the bushings from a scrap bin and had a bit of threaded rod lying about. The two L brackets were an old (sawn in half) motor mount I'd made myself for a bit of a project that never worked as expected and has since been disassembled. Only thing I need more of are the empty dessert jars... Shouldn't be a problem.

    Anyway, here it is:

    Click image for larger version. 

Name:	SE_HO-reciepts198.jpg 
Views:	77 
Size:	195.8 KB 
ID:	28988 Click image for larger version. 

Name:	IMAG4233.jpg 
Views:	86 
Size:	226.7 KB 
ID:	28990 Click image for larger version. 

Name:	IMAG4230_BURST002.jpg 
Views:	86 
Size:	309.2 KB 
ID:	28989 Click image for larger version. 

Name:	IMAG4234.jpg 
Views:	83 
Size:	252.9 KB 
ID:	28991

    Wal.

    EDIT: Nuts are torqued up to give a bit of resistance and stud-locked into position, each level moves independently.
    Last edited by Wal; 1 Week Ago at 05:16 PM.

  2. The Following User Says Thank You to Wal For This Useful Post:


  3. #2
    Muzzer's Avatar
    Lives in Lytham St. Annes, United Kingdom. Last Activity: 5 Hours Ago Has been a member for 2-3 years. Has a total post count of 218. Received thanks 32 times, giving thanks to others 5 times.
    Creme brulee?

  4. #3
    Wal's Avatar
    Lives in Stockport, United Kingdom. Last Activity: 15 Hours Ago Has been a member for 8-9 years. Has a total post count of 477. Received thanks 60 times, giving thanks to others 26 times.
    Indeed. And not only... Salted Caramel Cheesecake too...

  5. #4
    Muzzer's Avatar
    Lives in Lytham St. Annes, United Kingdom. Last Activity: 5 Hours Ago Has been a member for 2-3 years. Has a total post count of 218. Received thanks 32 times, giving thanks to others 5 times.
    Aha I'll have to look out for those!

  6. #5
    Wal's Avatar
    Lives in Stockport, United Kingdom. Last Activity: 15 Hours Ago Has been a member for 8-9 years. Has a total post count of 477. Received thanks 60 times, giving thanks to others 26 times.
    Hurry, limited edition...Click image for larger version. 

Name:	432253011_0_640x640.jpg 
Views:	30 
Size:	40.3 KB 
ID:	28992

  7. #6
    Neale's Avatar
    Lives in Plymouth, United Kingdom. Last Activity: 17 Hours Ago Has been a member for 7-8 years. Has a total post count of 1,500. Received thanks 278 times, giving thanks to others 10 times.
    With a bladder like mine, you'll need bigger pots...

  8. #7
    Wal's Avatar
    Lives in Stockport, United Kingdom. Last Activity: 15 Hours Ago Has been a member for 8-9 years. Has a total post count of 477. Received thanks 60 times, giving thanks to others 26 times.
    Quote Originally Posted by Neale View Post
    With a bladder like mine, you'll need bigger pots...
    They're ramekins, you animal...

  9. #8
    Quote Originally Posted by Wal View Post
    They're ramekins, you animal...
    No way would I ramekins mine in that tiny pot...
    -use common sense, if you lack it, there is no software to help that.

  10. #9
    Kitwn's Avatar
    Lives in Exmouth, Australia. Last Activity: 2 Hours Ago Has been a member for 2-3 years. Has a total post count of 655. Received thanks 84 times, giving thanks to others 17 times.
    Minor mods needed to cope with the shiraz as well as the salmon pinwheels but I like the concept of being able to tuck it under the bench and keep the swarf out of your hors d'oeuvres.
    Engineering is the art of doing for ten shillings what any fool can do for a pound.
    Wellington.

  11. #10
    Well Wal,


    You have inspired me to organise my small parts storage (Drawer 1 of 3).
    Click image for larger version. 

Name:	IMG_20201020_054911.jpg 
Views:	32 
Size:	283.9 KB 
ID:	29018

    Rest of the bench is still a shitheap though...
    Click image for larger version. 

Name:	IMG_20201020_054953.jpg 
Views:	30 
Size:	293.4 KB 
ID:	29019

    This is part of an ongoing project which started in March...

    Note the use of the soft-focus filter to give an extra dimension of dreaminess (I must clean the lens on my phone)

    Rob

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Saving For CNC
    By Fozz84 in forum Chinese Machines
    Replies: 5
    Last Post: 30-08-2016, 10:21 AM
  2. A4 Reference Chart Storage
    By magicniner in forum Workshop & Equipment
    Replies: 5
    Last Post: 29-06-2016, 05:54 PM
  3. Saving machine settings between sessions
    By Neale in forum Machine Control Software
    Replies: 19
    Last Post: 07-05-2014, 08:17 PM
  4. Mach3 digitizing wizard not saving file
    By dudz in forum Probing, Digitizing & Scaning
    Replies: 0
    Last Post: 08-09-2013, 09:48 PM
  5. bending metal -saving lives
    By BillTodd in forum General Discussion
    Replies: 2
    Last Post: 13-10-2009, 06:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •