Threaded View
-
23-10-2020 #1
Hello all
Am using an audrino atmega 328 and cnc sheild with 8825 driver for a project.
Amusing it for the first time.
Facing a problem while using the same, stepper motor nema 17 with this circuit. The motor is shivering and and the 8825 drivers are reaching a high temperature in just sometime.Even the fuse on the cnc sheild had blown.
Can someone guide what could be the problem.
Have adjusted the potentiometer as per reference from you tube channel and some site of electronics kit development.
Thanks in advance.
Mustafa
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Driver led's
By Duffman in forum Motor Drivers & ControllersReplies: 5Last Post: 16-01-2016, 02:41 PM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
M542 Driver
By Swarfing in forum Motor Drivers & ControllersReplies: 28Last Post: 28-06-2012, 09:12 PM -
Driver Lights Red
By Toddy in forum Motor Drivers & ControllersReplies: 6Last Post: 05-11-2011, 03:46 PM -
Driver box
By John S in forum General ElectronicsReplies: 1Last Post: 21-06-2009, 12:46 PM
Bookmarks