. .
  1. #1
    Hello,

    Me and my friend are working on CNC machine.

    Working area is 650x500mm
    Step motors are Nema 34
    Frame is made out of 100x100x8 tubes
    Worker is 180cm tall for comparison

    We have no clue what kind of spindle should we buy for this machine. We are looking at BT30 spindles - ATC.
    Can someone with more experience help me with spindle motor?

    What do you think about Z axis mount? It is HEB 300mm profile reinforced with 10mm plates. Will be stable enough? Or should I add some supports on the side?
    Thank you in advance.

    Click image for larger version. 

Name:	2020-10-18.png 
Views:	77 
Size:	571.2 KB 
ID:	29065

  2. #2
    What are you going to do to damp vibrations? Steel has very poor vibration damping and is easy to make resonate.

  3. #3
    Should we close all with epoxy?

  4. #4
    RobC's Avatar
    Lives in manchester, United Kingdom. Last Activity: 1 Week Ago Has been a member for 3-4 years. Has a total post count of 84. Received thanks 15 times, giving thanks to others 14 times.
    Sand/Concrete work well to dampen.

  5. #5
    I would add bracing on both sides of the column down to the bed. Commercial machines also brace rearward but that depends on the space you have behind the machine.
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  6. #6
    I will add some reinforcement beside column, but my main concern are vibrations. Somehow we should close all holow spaces... Column and the bed have them.
    What did you mean concrete to dampen vibrations?

  7. #7
    Will not concrete crack under vibrations?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: Project Da-Ta CNC mill
    By Da-Ta CNC in forum DIY Router Build Logs
    Replies: 0
    Last Post: 19-10-2020, 07:01 PM
  2. BUILD LOG: Project Da-Ta CNC mill
    By Da-Ta CNC in forum DIY Router Build Logs
    Replies: 3
    Last Post: 01-01-2020, 11:34 PM
  3. FOR SALE: Mans Pillar Drill... good start to cnc mill project?
    By kingcreaky in forum Items For Sale
    Replies: 0
    Last Post: 05-06-2017, 08:30 PM
  4. BUILD LOG: 3-Axis CNC Mill Project
    By Hobgoblin in forum DIY Router Build Logs
    Replies: 34
    Last Post: 23-12-2012, 11:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •