Threaded View
-
19-11-2020 #1
Hi guys, i am looking into building my first cnc based around a workbee
i dont know if this is the right place to ask this but could i have some advice on my build.
i am planning to buy a 750x1000mm mechanical kit off of ali express (https://www.aliexpress.com/item/3291...c00pATS93&mp=1) only because i think its the cheapest way to get a reasonable frame but maybe im wrong?
i then plan to swap out the x and z axis to linear rail (off ali) for around 150£
as far as motors go i am thinking 60BYGH401-03 because they are cheap and seem to have reasonably low inductance along with this i am thinking 48v and DM542 drivers but maybe there are better available?
for the controller i am thinking the mesa 7I96 because it seems cheap and pretty good from what i have read
spindle. i don't really know with this one, i have read some good things about the G-Penny 2.2kw one (https://www.aliexpress.com/item/3225...c00pATS93&mp=1) it seems cheap ish and gets pretty good reviews. at the same time i don't know how good it really is so maybe someone can recommend me something better.
ohh almost forgot. i plan to cut mostly aluminium and some occasional Delrin
let me know if you need anymore details thanks for any advice in advance Tank!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Welding gas advice needed
By cropwell in forum Welding, Brazing & EquipmentReplies: 8Last Post: 03-12-2019, 03:07 PM -
Needed some advice, please.
By PLIP5 in forum General DiscussionReplies: 3Last Post: 29-07-2018, 07:45 PM -
Advice needed on everything
By chrisjames in forum General DiscussionReplies: 12Last Post: 11-11-2015, 11:40 PM -
NEW MEMBER: Hello guys im a new member from the uk and looking for advise
By charlieallshapes in forum New Member IntroductionsReplies: 3Last Post: 05-10-2015, 08:20 PM -
NEW MEMBER: hey guys, help fom experienced fanuc controlled cnc programmers needed. thanks
By benread89 in forum New Member IntroductionsReplies: 1Last Post: 18-08-2011, 04:20 PM
Bookmarks