. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Hi to all and thanks for your help.

    I started to wiring a new controller box with the CSMIO IP-M, and have a doubt with the touch plate.

    Click image for larger version. 

Name:	5D3_9379_1024x1024.jpg 
Views:	210 
Size:	112.1 KB 
ID:	29266

    I don't know how to connect correct in the inputs i'm afraid to make something wrong and break the board.

    Limit switches are easy, but are isolated in chassis i'm afraid to make the same using a +24V in the touch plate with contact with the bit and chassis of machine and make a short-circuit or something similar.

    If anyone can help and say what pins are the correct i very grateful.
    Last edited by cncwoodprojects; 20-12-2020 at 05:06 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Touch screen??
    By John11668 in forum General Electronics
    Replies: 26
    Last Post: 08-10-2020, 11:42 PM
  2. FOR SALE: CSLabs - CSMIO IP-S motion controller + CSMIO ENC threading module
    By Ross77 in forum Items For Sale
    Replies: 4
    Last Post: 17-03-2020, 11:20 PM
  3. CSMIO/IP-M - wiring sanity check needed
    By Washout in forum CS-Lab (CSMIO)
    Replies: 6
    Last Post: 27-10-2019, 06:46 PM
  4. Csmio-IPM wiring A nema 17 TB6600 driver Z axis THC
    By Copypaste in forum CS-Lab (CSMIO)
    Replies: 0
    Last Post: 14-02-2019, 07:41 PM
  5. ES-D1008 + CSMIO/IP-S wiring
    By Matt81 in forum CS-Lab (CSMIO)
    Replies: 3
    Last Post: 03-05-2014, 09:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •