Thread: Hand feed XYZ cube
-
11-01-2021 #1
Hi All
This old Tony posted a video on heat treatment However What caught my eye at 16:41 min in was a novel to me XYZ Cube for hand feeding a CNC machine. Using three hand wheels. instead of the usual one with a selector switch to choose which axis to use it on.
I rather like it.
The video is here https://www.youtube.com/watch?v=O_Fo...el=ThisOldTony
Regards
John
-
11-01-2021 #2
-
11-01-2021 #3
-
11-01-2021 #4
Hi Depronman
Unfortunately Exactly how the knobs are interfaced is not clear in the video.
Hopefully he will show more in the future on how he retrofitted the very nice MAHO mill. Note the position of the Z axis Not the normal setup used in a conventional say Haas CNC V mill.
I wonder if there are other examples of this interface?
Regards
John
-
11-01-2021 #5
ToT likes the odd joke or two - highly entertaining videos, and (without listening to the video) it wouldn't surprise me if that's a bit of a prop for the video.
That said - I'm heavily involved in repurposing the fixed pendant on my mill with something more CNC-based/useful, including axis-feeds, DROs, probing etc, and - at least with UCCNC (and the plugin interfaces) - that 3-axis cube control would be pretty straight-forward to implement (particularly if you only wanted one-axis-in-motion). As Paul suggests - there's more required for a controller - like feed rates.
-
11-01-2021 #6
-
11-01-2021 #7
I believe Andy Pugh on the LinuxCNC forum fitted 2 MPGs on the apron of his original lathe conversion but IIRC he says he never used them. As noted, you need a controller that can handle several encoder inputs AND the means to process them. The various Mesa Electronics cards that are used widely in LinuxCNC can provide that expansion but they would significantly increase the budget beyond the cost of a few Chinese MPGs, not to mention the trial of configuring them.
This may be like retaining handwheels on a conversion - seems like a good idea at the time but turns out not to be so valuable in practice - speaking as someone who retained handwheels on my first machine. A wireless MPG is soooo much better on various fronts.
-
11-01-2021 #8
Could not agree more I have a WiFi pendant that I move between my Orac lathe and Boxford vmc190. I also have proper buttons on the control panel of both machines
I don’t miss the mechanical handles at all and the single mpg is fine for the amount of time that I operate the machine manually
It is an interesting concept though - would linuxcnc support it if sufficient inputs where available - at face value I see no reason why not
Paul
Sent from my iPhone using Tapatalk
-
11-01-2021 #9
Muzzer, all good points, and I’ve also got two encoder on my Mesa 7i76e /lathe, and very useful it is as well, I do use them all the time (as far as I use the lather, that is)
There are more controllers with one or two axis encoder than there are with 3 or more (these latter ones being some thing of a rarity). As far as the wireless pendants go, if these plug into your PC (rather than directly into s control card) with the machine running UCCNC or Mach, then you still have machine-in-loop and the machine is taking instantaneous demands from the handheld mpg and translating these to fragments of motion commands to the underlying controller. In which case you can manage multiple axis through the driver software. Been there, worn that tee shirt. I might just order three mpgs to demonstrate that.
Ironically, and tangential to this thread, my wired pendant (I don’t trust Wireless) appears susceptible to electrical noise now... if I walk it to my machine, the little led “tx” indicator will flicker from time to time as an unsolicited command gets sent. I’ve had it randomly turn the spindle on, and separately commands a Z-Ptobe. Maybe I need to try a wireless one! Or finish this dammed pendant.
-
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2nd gen Cube for parts/spares
By calida in forum Marketplace DiscussionReplies: 2Last Post: 09-03-2016, 05:06 PM -
Hand Ergometer
By irving2008 in forum General DiscussionReplies: 50Last Post: 11-08-2013, 05:55 PM -
75 mm HAND WHEEL
By Lee Roberts in forum Programmers CornerReplies: 18Last Post: 19-03-2012, 02:58 PM -
NEW MEMBER: want buy new or second hand cnc
By buildwood in forum New Member IntroductionsReplies: 8Last Post: 20-10-2011, 05:36 PM -
NEW MEMBER: second hand machine
By steve r in forum New Member IntroductionsReplies: 1Last Post: 18-11-2009, 09:00 PM
Bookmarks