. .
  1. #1
    Hi,

    I am a new member from Bedale North Yorkshire. I don't have much experience and would welcome and advice on recommendations to buy a CNC machine for more than just hobby use.

    Thanks

  2. #2
    Probably the first thing to do is specify the type of material you want to cut, and the size of the item you want to produce. These are going to be very important in determining what machine you need...

  3. #3
    Hi Dodgy Geezer I am looking to cut and engrave mdf and plywood at a maximum of 400mm what sort of machine should I look for.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: new member introduction
    By cnccraft in forum New Member Introductions
    Replies: 1
    Last Post: 19-09-2019, 09:50 AM
  2. NEW MEMBER: New member introduction
    By Ockert in forum New Member Introductions
    Replies: 1
    Last Post: 20-02-2019, 11:24 AM
  3. NEW MEMBER: New Member Introduction
    By Hulksmash in forum New Member Introductions
    Replies: 6
    Last Post: 16-07-2018, 08:58 PM
  4. NEW MEMBER: New Member Introduction
    By oldwoodworker in forum New Member Introductions
    Replies: 1
    Last Post: 11-04-2013, 01:56 PM
  5. NEW MEMBER: New member introduction
    By Martin Connelly in forum New Member Introductions
    Replies: 2
    Last Post: 17-12-2012, 03:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •