. .
  1. #1
    I am rebuilding my Denford Easiturn 3 lathe electrics.
    Coolant motor 0.25 amps
    Lube unit not sure but motor is small
    Cabinet cooling fan 0.25 amps
    Work light 0.5 amps

    I checked the old fuses they were all 5 amps, i don't have a parts list for my model but similar models have fuse ratings of 2 or 3 amps.
    If i wish to fit Eaton (they are a popular quality make), then what size do i fit and type b, c or d? Do people still fit fuses? I noticed the Eaton 6amp domestic mcb is about £4 would that do?
    Any ideas?

    Thanks
    Colin
    Last edited by Colin Barron; 23-01-2021 at 03:34 PM.

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Denford Easiturn 3 spindle alignment
    By Nemo1966 in forum Denford Lathes
    Replies: 3
    Last Post: 13-05-2020, 10:28 AM
  2. FOR SALE: Denford Triac PC inc Denford table plus chucks, and Denford CD software etc
    By Piero franchi in forum Items For Sale
    Replies: 8
    Last Post: 14-02-2017, 04:47 PM
  3. denford easiturn
    By scotty in forum General Electronics
    Replies: 8
    Last Post: 27-06-2016, 09:24 PM
  4. Denford Easiturn pnc2c
    By Colin Barron in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 0
    Last Post: 28-02-2016, 05:49 PM
  5. Eazicnc on denford easiturn
    By pistolknight in forum Denford Lathes
    Replies: 2
    Last Post: 24-11-2011, 07:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •