. .
  1. #1
    Right i have wanted to ask this question for a while and i know there are a lot of professional folk on here who will know how to do this .

    The software i am using is Vectrics Aspire4.

    My cnc work area is 400mm x 600mm x 100mm

    I would like to create a wall plaque lets say 2 meters by 2 meters 50mm thick and apart from the obvious of buying a bigger machine to do the job with , is there a way to take a scene lets say the last supper and scale it to 2.0 x 2.0 x 50mm and then overlay a grid over the picture and make the grid squares 300mm x 300mm x 50mm and then write a toolpath for the 300x300x50 grid and machine each grid and the end result would be to put them all together in there relevant order to make one whole scene measuring 2.0 x 2.0 x 50mm
    Is there any videos that explain how to do this or is there anyone on here can explain how to

  2. #2
    The feature you are after is called 'Tiling'
    Not sure about v4, but definitely in more current versions of Aspire and plenty of videos on YT explaining how to use it.

    Good luck with the project.

  3. #3
    Quote Originally Posted by Andrewg View Post
    The feature you are after is called 'Tiling'
    Not sure about v4, but definitely in more current versions of Aspire and plenty of videos on YT explaining how to use it.

    Good luck with the project.
    Yes V4 does indeed do tiling, you'll find it in the tool path section under Tile toolpath.
    -use common sense, if you lack it, there is no software to help that.

  4. #4
    Excellent guys
    I knew there were folk who know this
    Thanks Guys

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Uploaded picture sizes
    By BigBrand in forum General Discussion
    Replies: 3
    Last Post: 17-01-2021, 10:58 AM
  2. picture conversion to DFX/ Gcode. Help required please.
    By Gasgasbones in forum Programmers Corner
    Replies: 17
    Last Post: 19-12-2014, 11:42 AM
  3. NEW MEMBER: Jig angle head expert look at my PICTURE please!
    By hoezap in forum New Member Introductions
    Replies: 6
    Last Post: 25-07-2012, 05:09 AM
  4. mods picture and site logo
    By motoxy in forum General Discussion
    Replies: 3
    Last Post: 26-04-2012, 01:09 PM
  5. Microcarve picture carving software
    By cnctoybox in forum CAD & CAM Software
    Replies: 0
    Last Post: 26-03-2012, 07:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •