. .
  1. #1
    Adtech (Chinese) industrial CNC system c/w 2.2Kw servo motor and driver for spindle,2 off 1.8Kw servo motors and drivers for X and Y axis and a 750W servo motor and driver for the Z axis (all servos and drivers are AC).Also comes with main console and sub console with an MPG.input and output boards, and all cables and fittings.Would make an excellent retrofit for a BP interact.Originally purchased for a BP EZI TRAK,but changed to another system as I wanted A,B and C axes.
    Never ran,but shop soiled as it has been on the shelf for a couple of years.All manuals and instructions included.Looking for £1000.

  2. #2
    What model number is the controller? Willing to split any of the system?

  3. #3
    Quote Originally Posted by Chaz View Post
    What model number is the controller? Willing to split any of the system?
    ADT-CNC4640 is the controller (£790 + VAT to buy new).
    FCNC4M Additional panel.
    CNC4A MPG.

    Would split if had a decent enough offer but, am only asking £1000 for the whole bundle.

  4. #4
    Quote Originally Posted by molliemilo1 View Post
    ADT-CNC4640 is the controller (£790 + VAT to buy new).
    FCNC4M Additional panel.
    CNC4A MPG.

    Would split if had a decent enough offer but, am only asking £1000 for the whole bundle.
    Understood, not a bad price. Problem is, I dont need all of it. I'm primarily after the spindle motor / setup to see if I can upgrade my Bridgeport with, the other stuff Ill make use of as needed - the control might be interesting but just invested in SGHZ stuff for my lathe (similar setup) but would remain with them most likely for my next upgrade / retrofit.

    Let me think about it.

    Thanks

  5. #5
    Will put on Ebay.The 2.2kw spindle motor is mounted on a motor plate that fits a Bridgeport BR2J head with a motor driven 10M pulley of 72 teeth driving a spindle pulley of 36 10m teeth,which gives a 2:1 ratio.Motor running at 60hz will give 3600rpm at spindle (approx.).
    Last edited by molliemilo1; 26-01-2021 at 07:06 PM. Reason: More info.

  6. #6
    Just looking at this again. Can you send me some info about the spindle system please?

    Is it similar (or the same) as this?

    https://www.szghauto.com/product/93.html

  7. #7
    CNC system now sold.

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. FOR SALE: Complete CNC plasma control system with THC from CandCNC.com
    By adscnc in forum Items For Sale
    Replies: 1
    Last Post: 15-09-2019, 03:42 PM
  2. FOR SALE: Conect 121 (updated) system for sale - complete or in part
    By Clockworld in forum Items For Sale
    Replies: 0
    Last Post: 20-05-2019, 09:44 AM
  3. FOR SALE: CNC4U 3 axis system
    By emlclcy in forum Items For Sale
    Replies: 10
    Last Post: 02-01-2018, 11:52 AM
  4. TTS / R8 system spindle
    By routercnc in forum Drawings
    Replies: 0
    Last Post: 23-07-2017, 07:12 PM
  5. FOR SALE: Selling z axis complete set up
    By DrNik in forum Items For Sale
    Replies: 10
    Last Post: 20-08-2013, 11:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •