. .
  1. #1
    I have a Gravograf engraver whose controler has broken leaving only the power unit and stepper motors. I have written a program in VB net to read an HPGL file (of the design I want to engrave) and send pulses to the machine. Works a treat with Windows 98. With Windows XP the machine makes horible noises 'cos XP does not normally run in Hard Real Time. Can anybody help me to overcome my problem?
    Best regards
    Patch

  2. You'll probably hate this, since you've already done so much work but..

    Have a look at EMC2 running under linux to control your machine. Use a hpgl to G code converter (or start with a DXF file and convert to G code which may be easier).

  3. Quote Originally Posted by patch View Post
    I have a Gravograf engraver whose controler has broken leaving only the power unit and stepper motors. I have written a program in VB net to read an HPGL file (of the design I want to engrave) and send pulses to the machine. Works a treat with Windows 98. With Windows XP the machine makes horible noises 'cos XP does not normally run in Hard Real Time. Can anybody help me to overcome my problem?
    Best regards
    Patch
    Hi patch and welcome.
    While Bill is right that EMC/Linux is a good machine controller (and one I use) there is a Windows alternative, MACH3 which is also free (as long as your job is less than 500 lines of GCode) and runs on XP - it deals with the real-time issues.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. laser cutter/engraver rebuild build log
    By gavztheouch in forum Laser Machines & Building
    Replies: 37
    Last Post: 10-11-2015, 05:37 PM
  2. I will have a trial for programming job
    By hoezap in forum Tool & Tooling Technology
    Replies: 7
    Last Post: 09-02-2013, 03:00 PM
  3. NEW MEMBER: Fanuc Macro programming
    By curly3456 in forum New Member Introductions
    Replies: 0
    Last Post: 02-02-2012, 10:20 PM
  4. Spring loaded drag engraver
    By Sharx in forum Tool & Tooling Technology
    Replies: 1
    Last Post: 16-02-2011, 11:10 PM
  5. Programming Mach3 screens
    By Smiler in forum Artsoft Mach (3 & 4)
    Replies: 7
    Last Post: 17-01-2009, 03:15 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •