General purpose hook up wire

[dazp1976]

https://www.igus.co.uk/chainflex/con...SAAEgJOKfD_BwE

[dazp1976]

Atm all I use is cheap 18awg & 20awg from banggood.
It's all unshielded but seems to work fine for my mill. Possibly because of the different voltages I'm using and I don't have a vfd or anything.
Once I get my Servo running on the spindle things may change.
I'll go to Igus for mine. 4 core cy for the steppers, 2 core cy for the signals, and Cat6a for all the switches.

I have all the shielded cables and filter needed for the servo already so that part is covered.