NVEM V2 Novusun BIN file

[palec]

Hi,

Anybody can help me to source a bin file (firmware) for Novusun NVEM V2 Ethernet controller? I accidentally loaded firmware for NVUM - usb version.

Everything was OK before wrong firmware uploaded. Now I can't get controller to connect. Not sure whether I can fix it but its worth a try.

There is a link on this site but doesn't work. https://www.nvcnc.net/pdf/nvem.bin.rar

Thanks

[ramyCrc]

Hello. Do you solve you problem? Do you succeed to write correct firmware?

[palec]

No, I haven't solve it. I've contacted the supplier and he said that his technicians are working on solution. I don't have big expectations. Will see. I bought another unit.

[ramyCrc]

Do you find. Bin file an you fail to write firmware or no get the. Bin file?

[palec]

I haven't found a bin file for NVEM.

[dazp1976]

No, I haven't solve it. I've contacted the supplier and he said that his technicians are working on solution. I don't have big expectations. Will see. I bought another unit.

Not another NVEM I hope
Don't people read the bad reviews on these things?!.

[palec]

Unfortunately, yes. Another NVEM. Mainly because of size constraints and wiring in place. I did not run the machine yet but run individual axes ok. Spindle with rs485 and also limit switches. All ok.

[dazp1976]

Should have looked into the AXBB-E.

[dazp1976]

Unfortunately, yes. Another NVEM. Mainly because of size constraints and wiring in place. I did not run the machine yet but run individual axes ok. Spindle with rs485 and also limit switches. All ok.

Should've looked into the AXBB-E.

[Rony]

Palec,
I am looking for the bin file for the usb version.
The download link does not work.
Maybe you can help me with the file for NVUM version 2 USB 6 axis.
Grt Rony