. .
Page 5 of 5 FirstFirst ... 345
  1. I just came across this thread and thought that some of my adventures with ball screws, bearing mounting blocks, and making ball nuts fit where they shouldn't might be of interest.
    https://www.homemadetools.net/forum/...598#post174256

  2. The Following User Says Thank You to tonyfoale For This Useful Post:


  3. #42
    I saw the video on YouTube a week or 2 ago. Very impressed.

  4. [QUOTE=WoodKnot;125523]
    Quote Originally Posted by A_Camera View Post
    Yes, you seen it right. I have a fairly large room, which is a home office / hobby room / software, firmware and electronic development center, photo studio, as well as other hobby activity room. My CNC and my two 3D printers are used in this room as well. However, I NEVER use any liquids to cool and lubricate, I print only PLA and PETG, my spindle is air cooled, my CNC is covered around and I use a dust shoe when milling PCB and most other things. I don't mill any wood. Anyway, this solution suits me well.

    Just had to read up on PLA - I am in the recycling industry and i have never heard of it - so its a biopolymer, but not a commodity polymer.

    Looks like it composts well!

    What do use it for? Is it brittle, it does not sound like a flexible polymer?

    WoodKnot
    PLA as mentioned is a very common filament used in FDM/FFM 3D printing of plastics. While the numbers look very good for biodegradability it actually requires specialized enezyme to get the best results. Other wise it is rather slow in degrading (think oak leaves and other durable starches. Depending on what is added to it can be rather strong and can be post processed with heat to cause further interlayer bonding as well as increase cross linakges of the polymers. Not UV stable but does have a rather slow UV degradation (Longer than Polypropylene plastics). Can be solvent smoothed with certain chemicals and as such is less tolerant than say the PET/CPE family. Can be made food safe.

    Hope that gives a few better ideas on it. Used heavily in the miniature and modeling community as it is one of the cheapest filaments in the industry. Not considered an engineering material though.

    Also having been one of those folks who bought a machine that did NOT use proper bearings (or even blocks to be honest). I can tell you the headaches from chasing down chatter, flex, runout and a mess of other issues is not something I would wish on anyone. That was a long time ago and I have a much better machine now that needs some servicing and new ballscrews on the X axis. That and doing some work preparing hopefully to move to the US.
    CAD/CAM software SolidWorks 2020, Aspire v9.5
    CNC Machine: http://www.mycncuk.com/threads/3661-...Second-machine
    3D printers: 2 x Prusa MK2.5's, 2 x Neptune 2 Mod'd, Artillery SW X1, Photon S, Uniz IBEE, Elegoo Saturn
    Work with Solid Surfaces, Acrylics, Woods, Foamboard, PLA, ASA, PMMA, PETG/CPE, PCBlends
    Work Computer: Lenovo P700, K5200, 88GB RAM

    www.marino-customs.com

Page 5 of 5 FirstFirst ... 345

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Xzero Raptor CNC build - linear rail and ballscrew selection
    By Mattia in forum Gantry/Router Machines & Building
    Replies: 18
    Last Post: 27-08-2021, 12:34 PM
  2. 2m+ travel lengths with a ballscrew, using linear rail to support the ballnut
    By Desertboy in forum Rails, Guideways & Bearings
    Replies: 9
    Last Post: 04-02-2018, 05:50 PM
  3. 3 axis ballscrew and rail kits on ebay
    By Richard in forum Classified Ads, Buy, Sell & Swap
    Replies: 9
    Last Post: 18-05-2017, 01:06 PM
  4. NEW MEMBER: Hi,Friend,I'm a B2C seller from China for ballscrew,linear guide,linear shaft etc.
    By yvesleeok in forum New Member Introductions
    Replies: 11
    Last Post: 10-08-2013, 10:15 AM
  5. Linear rail and ballscrew dimensioning for R/C router
    By CarlNicholasCarlsson in forum Linear & Rotary Motion
    Replies: 0
    Last Post: 24-03-2013, 05:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •