Page 2 of 2 FirstFirst 12
  1. #11
    Lee Roberts's Avatar
    Lives in Wigan, United Kingdom. Current Activity: Viewing Moderator Control Panel Has been a member for 9-10 years. Has a total post count of 2,545. Received thanks 161 times, giving thanks to others 652 times. Made a monetary donation to the upkeep of the community. Referred 10 members to the community.
    Quote Originally Posted by LevonTech18 View Post
    hello< any one share me a software from http://www.planet-cnc.com, i don't have a 64 Eur.. to get a full ver.. if i know'd the software is not free i'm not going to build it . it's to late i have totaly make , pcb,programed microchip Pic18f4550 ..
    Hi No sorry we dont do things like that here, if you want the software you will need to go and buy it like everyone else.
    .Me

  2. #12
    Lee Roberts's Avatar
    Lives in Wigan, United Kingdom. Current Activity: Viewing Moderator Control Panel Has been a member for 9-10 years. Has a total post count of 2,545. Received thanks 161 times, giving thanks to others 652 times. Made a monetary donation to the upkeep of the community. Referred 10 members to the community.
    Quote Originally Posted by Kroko View Post
    Hello

    If anybody needs any assistence with controller of software I'll be glad to help.

    Andrej
    Welcome to the site Andrej, thanks for the support.
    .Me

  3. #13
    really nice software
    usb cnc i get my licence

    i build the pcb its very easy to build it
    from

    http://www.planet-cnc.com/

    im from tunisia if some 1 need more info contact me

  4. #14
    and1_cu's Avatar
    Location unknown. and1_cu Last Activity: Has a total post count of n/a. Referred 6261 members to the community.
    Hi, im new here,
    i need to build one,
    if i build the board, buy the pc software,....how can i program the PIC-ic ? is the IC program free? its in *.bin or *.hex
    where can i get one?

  5. to program the PIC you need a programmer and you can download the firmware for the PIC for free from the planet CNC site. Programmers cost between 20 and 50USD on ebay, the cheap ones plug into a parallel port, the more expensive (like microchip's PicKIT2) are USB.

    Or you can by the PIC ready programmed for 11Euro and since you are buying the software this would be the easiest and cheapest way to do it...

  6. #16
    Quote Originally Posted by Kroko View Post
    Hi

    If anybody needs assistance with controller I can help.

    Andrej

    Hi Andrej
    I have a Proxxon MF70 that I cnc'ed using a usb controller (4axis mk 1 I think) and generally i have been very happy with it and the software. I have a problem with G2 and G3 circular interpolation. No matter what I do I seem to be only able to make a quarter circle from say x0 to x10 y0- y10 with a 10mm rad. To go from x10 - 20 y10 - y0 10mm rad is mostly ok but going from x20 - x10 y0 - y-10 and
    it starts making snake patterns and looses location of 0 datum point. I don't have any problem doing very detailed engraving and linier interpolation. Hope you can help.
    Phil Gravett (Philcraft Steam)

  7. Hi

    Please send your .settings and problematic g-code to my email.

    Andrej

Page 2 of 2 FirstFirst 12

Similar Threads

  1. FOR SALE: Galil Motion Controller - PCI DMC 1842 - four axes
    By lateAtNight in forum Items For Sale
    Replies: 1
    Last Post: 24-06-2014, 03:41 PM
  2. EMC2 or USBCNC?
    By icedfusion in forum Machine Control Software
    Replies: 9
    Last Post: 12-02-2013, 04:04 AM
  3. My new 4 axes wood processing CNC router...
    By florins in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 29-03-2012, 04:53 PM
  4. SWAP: Looking to swap this USBCNC board
    By John S in forum Items For Swap
    Replies: 8
    Last Post: 12-08-2011, 08:27 AM
  5. Usbcnc
    By Web Goblin in forum EdingCNC USBCNC
    Replies: 40
    Last Post: 12-08-2011, 06:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •