. .
  1. #1
    I am new to cnc and I purchased a workbee 750 x 1000 cnc from bulkman beginning of last year. I built the machine without any problem, and decided I would follow the video's on bulkmans resources and run it with mach 3 software. I spent an age wiring all as instructed and down loaded Mach 3. I can navigate a computer but i am not really that confident and knowledgeable with this software.
    After many attempts and 3 NVM CNC controllers later( as I thought this was the problem) I still cannot get my drivers or spindle to work to the software.I did for about 10 minutes once but when I switched laptop off for the evening, next day nothing and back to nothing.
    I must have spent hundreds of hours searching the web and trying different ports and pins strategies. I have come to the conclusion i am really rubbish and need from someone who knows what they are doing to get it going. I have attached my wiring, wiring diagram I have followed and some of my pins and ports pages. I am using a aspire laptop.
    If anybody has the patience to navigate me through my incompetence it would be massively appreciated.I just don't know what I am doing wrong.
    Russ Bates
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	thumbnail_Image (2).jpg 
Views:	77 
Size:	175.8 KB 
ID:	30522   Click image for larger version. 

Name:	thumbnail_Image (1).jpg 
Views:	74 
Size:	191.6 KB 
ID:	30523   Click image for larger version. 

Name:	thumbnail_Image.jpg 
Views:	70 
Size:	174.3 KB 
ID:	30524  

  2. #2
    https://youtu.be/Q8Krv5y152g

    This might help, he's got the same controller. I remember watching that ages ago

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Ooznest Workbee CNC 4th axis wiring
    By Lucky83 in forum Machine Discussion
    Replies: 0
    Last Post: 30-04-2021, 09:11 AM
  2. Problems with a new 3040 machine
    By Lennewton in forum Chinese Machines
    Replies: 20
    Last Post: 03-07-2019, 05:42 PM
  3. Workbee with Duet 2 wifi and planet cnc
    By ravihotwok in forum Control Hardware & Systems
    Replies: 9
    Last Post: 20-06-2019, 09:26 AM
  4. Stuga routermaster problems computer dont seem to be connected to machine
    By aled in forum Milling Machines, Builds & Conversions
    Replies: 7
    Last Post: 16-01-2013, 04:11 PM
  5. NEW MEMBER: Beginning machine shop needs help with CNC Step High Z S400 Problems
    By NorthernLightsMachines in forum New Member Introductions
    Replies: 2
    Last Post: 24-07-2011, 09:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •