Thread: Info request and possible links
I am in the planning phases of my project and need to find out more about what type of material to use for my gantry uprights.
I've been looking everywhere but cant find any info on types of aluminium and or the numbering that goes with it and generally what its good for. I know its a beeeg subject but i need to start somewhere, so any help will be .... well erm helpful
Can someone please give me some info on this or just point me to some theads/links pls?
Try http://www.metalfast.co.uk/index.htm lots of info ... I have no connection to this Company.Tim G-C
“I disapprove of what you say, but I will defend to the death your right to say it.”
(attrib. Voltaire but written by Evelyn Beatrice Hall "The Friends of Voltaire" 1906)
Thx for the quick reply!
I had a look and the most interesting thing was this:
"M82 is manufactured at one of the most modern aluminium rolling mills in the world. Located in Pietermaritzburg, South Africa, Hulett Aluminium" - LOL!
I lived right next to the new plant when they built it in 98 sharing a house with the QS of the project. What a small world!
I can tell you that plant is MIND BLOWING!
Anyway, I couldnt really find what i was looking for, so i suppose the question really is what you guys suggest i use for items like the gantry uprights, z-plates and spindle mount?
I'm no expert but I am led to believe that a good aluminium for basic machining is 6082T6, this is the strongest of the 6000 grades and is the stuff quite commonly found on ebay (as here, by way of example). It machines very nicely. It is not as corrosion resistant as the 5000 series which is also commonly found but is not as nice to machine. For hobby use either will do.
See here for more info
the aalco site in Peter's post above has a good set of info too [/edit]
Last edited by irving2008; 13-12-2009 at 11:17 PM.
I'v used them as well Ross, good service really.
Another thing to try when contacting these companys is to ask what is in the off cut bin, Bargin's to be had !
By luke11cnc in forum Tool & Tooling TechnologyReplies: 7Last Post: 11-12-2011, 01:45 AM
By Imtryin in forum General DiscussionReplies: 3Last Post: 29-06-2011, 03:27 PM
By ptjw7uk in forum General DiscussionReplies: 1Last Post: 19-02-2011, 10:09 AM
By ali hedi in forum Machine DiscussionReplies: 4Last Post: 22-09-2010, 10:13 AM