1. #1
    Hello all
    Our home built motorbike engine is running well now see it on youtube
    under dohctriple.avi or search home made rocket engine george pooley

    let me know what you think
    cheers all and
    merry christmas

  2. #2
    I think that I am having difficulty finding it ...
    Why not provide a ?
    Unless it is meant to be the test (of our ability to search www)

  3. #3
    Can't find it either

  4. well wasnt easy but I found it....

    [ame="http://www.youtube.com/watch?v=7F3Rp3McN48"]YouTube- dohctriple.avi[/ame]


    thus proving it wasnt a spam post as reported by several... due to the fact this has been posted, without the link, on just about every engineering site..:heehee:

  5. thus proving it wasnt a spam post as reported by several... due to the fact this has been posted, without the link, on just about every engineering site..
    Yes Sorry Phil, it looked like spam to me :)

  6. Quote Originally Posted by BillTodd View Post
    Yes Sorry Phil, it looked like spam to me :)
    You weren't the only one Bill...

    I think a lot of people thought that because the search terms given dont work on youtube... the only way I found it was to use "+george +pooley" as anything else either returned nothing or too many hits to search...

  7. #7
    Sorry about the link wouldnt work first time so gave up, busy with christmas and kids etc.

  8. #8
    Sounds to me like there may be some problems with the valve timing. The odd puff of smoke out of the carb would suggest this too.

  9. #9
    Cheers for the reply pavlo, the engine is originally a 750 triumph triple with pushrods & rockers, weve rebuilt the top end and put on overhead cam boxes we made from scratch using cam shafts from a japanese engine. we will be experimenting with cam forms as well as timing in the new year, this was the first run of the engine, it has since been test ridden round cadwell by our test rider at race speeds (also on youtube),but the electronic ignition timing couldnt keep up above about 12 to 13 000 rpm as its only designed for about 8000. we have an electronic ignition being designed to cope with it. The engine is really only a test bed for the ohc system which will be fitted to a v6 we are building based on a rocket3 engine block and two sets of 750 barrells, more info will be available when the web site is ready at www.ukrocketengines.co.uk currently under construction, or google george pooley all the bikes and ideas come from him.
    cheers
    phil

Similar Threads

  1. Steam Engine made of GLASS
    By WandrinAndy in forum General Discussion
    Replies: 2
    Last Post: 13-06-2013, 09:57 AM
  2. Home made (easy ? ) MPG
    By Buba b in forum General Electronics
    Replies: 7
    Last Post: 20-12-2010, 11:07 PM
  3. Home made drivers or Buy cheap?
    By pjl83 in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 10-06-2010, 01:09 AM
  4. My home made CNC mill
    By pjm in forum DIY Mill Build Logs
    Replies: 0
    Last Post: 07-06-2010, 12:01 AM
  5. Home made CNC for 50
    By Lee Roberts in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 26-05-2009, 08:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •