. .
  1. #1
    Hi Guys,

    i hope this is ok for me to post here.

    we are currently trying to get rid of our Rye MG2400 Twin Head CNC 8ft by 4ft, its been very reliable for us over the 13 years we have ran this machine but unfortunitly it has developed a fault on the X-Axis where the auto greeser failed and caused the bearings to gouge the rails resulting in juddering that if ran at full speed gives a overload error.

    as this machine is no longer needed as we have upgraded to a newer machine.

    Machine set-up as below:

    2no. Perske 4.8Kw (17,500 rpm) spindles (Manual tool change). both very good condition with smooth rotation

    2no. Pneumatic Drillings Heads (Manual tool change).

    Bed Size: 8 Ft x 4 Ft.

    Comes with operation & programming manual

    Upgraded control system by CNC support.

    VACUUM PUMP NOT INCLUDED


    https://www.ebay.co.uk/itm/RYE-MG2400-8FT-BY-4FT-Flatbed-CNC-SPARES-REPAIRS-ONLY

    Thanks

    Ryan
    Last edited by PG-Ryan; 14-03-2022 at 10:24 AM. Reason: Link updated / Relisted

  2. #2
    Still available and relisted

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Rye cnc twin head quantum midi
    By Sean F in forum Rye CNC Routers
    Replies: 4
    Last Post: 21-07-2020, 02:28 PM
  2. Replies: 0
    Last Post: 14-01-2019, 06:29 PM
  3. twin drive
    By universally in forum Gantry/Router Machines & Building
    Replies: 6
    Last Post: 19-01-2015, 08:00 AM
  4. FOR SALE: AXYZ 6012 - 4mtr x 2mtr Twin Head CNC FOR SALE
    By daverowland in forum Items For Sale
    Replies: 7
    Last Post: 28-06-2013, 06:18 PM
  5. Twin X axis Drives
    By Hobbit in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 20-02-2009, 08:22 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •