. .
  1. #1
    clan's Avatar
    Lives in Southport, United Kingdom. Last Activity: 4 Weeks Ago Has been a member for 0-1 years. Has a total post count of 4.
    Hi all just built my cnc and trying to come to terms with fusion 360 so thought i better sign up and start asking for help haha

  2. #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom. Last Activity: 10 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,425. Received thanks 1,443 times, giving thanks to others 108 times. Referred 1 members to the community.
    Welcome, Ask away and I'm sure someone will chime in with a suggestion or answer.
    -use common sense, if you lack it, there is no software to help that.

    Email: dean@jazzcnc.co.uk

    Web site: www.jazzcnc.co.uk

  3. #3
    clan's Avatar
    Lives in Southport, United Kingdom. Last Activity: 4 Weeks Ago Has been a member for 0-1 years. Has a total post count of 4.
    Thank you not getting much from ooznest one question i need to ask is why wont my bit fit in the collet its a mafell 1000 the bit is 1/4 x 1/4 x 1/2 x 5/2" and the collet is 1/4 3.65mm

  4. #4
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom. Last Activity: 10 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,425. Received thanks 1,443 times, giving thanks to others 108 times. Referred 1 members to the community.
    Quote Originally Posted by clan View Post
    the collet is 1/4 3.65mm
    Is that a typo.? Because 1/4" is 6.35mm, not 3.65m. That would be closer to 1/8".

    When you say it won't fit, in what way doesn't it fit.? is too loose or too tight.?

    If it's too tight then I'd suspect the collet is metric 6mm, this would make it tight for getting in an imperial tool.
    -use common sense, if you lack it, there is no software to help that.

    Email: dean@jazzcnc.co.uk

    Web site: www.jazzcnc.co.uk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •